Robin Hoods Playground

i think the new JF installs for you automatically. 1.73

any word?

WAVE 6 !!!!! get the mod and run it thru ABGX360(the ABGX MOD). did it once then ran again with mod installed.. ------------------------------------------------------------------------------- \\//\\//\\//\\// _ |_ _ \ \/ /_ _ _ \\//\\//\\//\\//\\//\\//\\//\\//\\//\\ //\\//\\//\\//\\ (_||_)(_|/ /\ \_...

dumb Q, but ill ask anyways......
did you go into bios and then power the drive? then exit bios( F2 ) windows will recognize after that. i would use the 1.61 FW for the liteon. don't use the 800 FW

i had issues with 1.71 and had to go back to 1.69 until the 1.73. now all is good.

when you flash with LT or LT v1.1 its like it mimics a 9xxxx series drive, so unless you have your keys...
you would have to go about it like the 9xxxx series drive.

its not for the 64 bit is it?
i'm sur eits not but yua never know

was it flashed with ? or is it stock? are you probing? cause after the initial time you will get that error. 32 bit right?

FIXED>>>> just used the 64bit, even though i am on 32 bit win7

assuming you have a ck3 , and port I/O installed and proper drivers, netframework, the via 6421 card is prefered. if you have the driver disabled renamed and enabled method, iprep will list the first port when installing boot disk. on the card its usually the most outer port will be the one used bu ...

the pro comes wit the usb connector! just use that.if you dont have a usb for the ck3 pro or a serial adapter, then just get a psp usb cable at your local game reseller. there like 5 bucks and work! i know this...

yeah kreon would be nice. i am to lazy to go find and buy a kreon. more work? not really when using the blaster, everything is built in.all i got to do is carry the brick around. appreciate the time though and the thought!!!! UPDATE!!! got it to work,had everything right, i figured since in vendor m...

so just to confirm, i can flash the 800 FW to my current 360 lite-on that i use to play games? thenjust flash back?
is there a method i can use with wXripper then splitvid with xbc or mulleter

thanX m8. it was the broken port! i new it wasnt a smart question but had to ask!

i have the ck3 pro as well as the ck blaster. the pro is pretty straight forward. the ck3 blaster is easy as well. if you polan on only flashing one drive i would go with the blaster,pretty easy the hard part was the little wires and plugging them in. its not really what i am used to so still kind o...