Robin Hoods Playground

Thanks for all of your reply's and input guys. I have just ordered him a new lite-on 7 series drive. The box is out of warranty (2008 model) and i think he has his eye on a new 360s anyway so he's not too bothered about a ban if it happens, besides the box will eventually rrod anyway. I think there ...

Thanks for the swift reply Cofree, i Wasn't 100% but you have confirmed what i thought. I didn't know there was a chance of being banned with same model drive , guess microsoft are the only ones who are allowed to repair em then? . Thanks again man appreciate it Fozzy

Hi Guys, Not been on here for ages. I have just had a mate get in touch with me about putting a new drive in his 360. His current drive is a lite-on 7 series with stock firmware giving him open tray error. He wants a new drive, so is it ok to spoof a BenQ in there as stock? He plays on live so doesn...

Hi, I stand to be corrected on this but i think with jungleflasher you can just load your original firmware into target and write it straight to your lite-on. I am not sure about iprep as i always use jungleflasher. I would assume you could load your original firmware into iprep and use that to writ...

Sorry for the delay in replying guys. I have read somewhere that its not recommended to play on live with a spoofed drive, but i guess this isn't technically spoofing :?: . I only wanted to use the benQ instead of lite-on because of the issue a lot of people have had with not reading back-ups. The L...

Hey Guys sorry to jump in, save me starting a new thread. I have a spare BenQ which i would like to put in my lite-on v1 box, and keep the lite-on as stock. Am i reading right that i can just inject the key into BenQ LT and thats it, good to go? How bout online play? thanks for your help in advance

Thanks Gazzer, much appreciated, i thought it was the case but just needed to be sure. I spoofed the firmware into a benny last night and played a few games and all was good so guess i am good to go. Thanks again, appreciate it

Hi Guys, not been around for a good few months, so am a bit out of touch.I have a Q about flashing LT to my virgin box. I have just opened it up and dumped the key using LO83 info in jungleflasher. I am going to spoof to a benQ to make sure info is correct. Do i just spoof dummy to iX-LT and flash a...

thanks for the reply man, i thought that you could only use firmware for which drive it was intended but worth a try. I will tell my mate he needs a sammy or benQ drive to make this work, or like you say just wait for LT firmware. Thanks again

Hi Guys, not been here for a while! I have a Q so forgive me if its been answered before somewhere on here. I have a buddy's lite on 74 console which is not and will never be online. i was wondering if i could open a sammy ms 28 firmware(iX 1.61), spoof it to lite-on 74 then flash it to a lite-on as...

Hi guys, 3 of my pals got banned today in uk, old box with hit 79, elite with benq and premium with lite on 74. We all play online and have our own backups of our originals, all running iX 1.6 except the hit 1.51. My premium with sammy spoofed as lite-on 1.6 is fine and my wifes premium with benq 1....

:D Hey guys good news, ITS ALIVE!!!!. Tried different tray positions for an hour. Wasn't quite convinced it should take this long, so popped over to a pals who has a serial-usb cable which i borrowed. Got back and managed to get key 1st time :D, so the com port on my mobo is the suspect at the momen...

Hi Guys thanx for your reply's. i will try your suggestions shortly and post back to let you know how it goes. I did actually think to myself today that i am probably one of the unfortunate ones who has a faulty ck :( . i will post back shortly. many thanks again ;) Fozzy

Thnx for the swift reply guys, green light on probe is fine, tried turning drive off then on again, didn't seem to make a difference. Just out of curiosity how far do you guys have the tray closed? also something which isn't that clear is the eject switch position on the ck3, i am ejecting the drive...

Hi Guys I'm back!!! not going too well at the moment, decided to take a break and post my question. I have got the drive connected and am running dvdkey32 i get the inquiry.bin and identify.bin but the key keps coming back as all 0's. I have tried the tray in loads of positions but it doesn't seem t...