Robin Hoods Playground

Make sure your wifi is connected. I have used letterbomb many times, always worked. If you cant get it to work use indiana pawns. Works well also. Sorry for the late response. They say better late than never

Also make sure you are using kprobe to check the quality of your burn.

I have seen such drive yesterday lite on 16D5S fw1175 I gues if I can dump it it can be used with a wasabi 360 or x360key ? But there is no info on dumping it. I wonder if the rgh methode would work ... It's not my drive so i can't mess around with it ... With rhg being able to be done on all slim ...

I am really leaning toward just going onto ebay and buying a new Benq and spoofing it as a hitachi Just a heads up.... You may not be able to play any ap2.5 or xgd3 games if you do this . You need to make sure you get the same drive that was inside there originally. Spoofing hasnt been supported in...

No prob Cofree. Link added also.

This should be good to those who dont wanna spend a lot on the discontinued ihas b drives...... C4E’s BurnerMAX Payload Tool in association with Team Jungle & Team Xecuter --------------------------------------------------------------------------------------------------- Official release of the ...

Lt3.0 for most drives. Check c4evaspeaks.com for details.

Try Jungleflasher. Works perfect. Almost forgot. If the dashboard is above 13599 the drive is now a 0251 . Probing r707 is no longer gonna work. Have a read at the jf tutorial. It explains it in detail.

No. Most but not all. Check c4evaspeaks.com for list of drives that cfw is released for.

You need to be using the newest abgx and yes you are correct about the ihas. There is a tutorial on the site that explains how to flash the ihas. As for a link to a cheap one..... Good luck. They have been discontinued so naturally the prices have doubled or worst.

dish wrote:i see ihas 124 c has been added to the lite-on firm ware page. does this mean that it can be flashed for the xgd3 games?

No. Thats stock liteon FW. There is no hacked firmware for c revision drives.

xtremeflasher wrote:you can always use the tx pcb replacement.

There is no public info on dumping the drives FW. Even if you did have a way to dump the drive, you still dont have any hacked FW to put on the replacement pcb. Replacement pcb will do no good as of right now.

There is at least two traces you have to cut on the 8's and 9's. Depending on which way your comfortable with. The way that I am comfortable with requires you to cut three traces. On top of that, soldering in a switch to manipulate the voltage going to the flash chip to trick the controller into gi...

ramzfan wrote:By the way how can i read my dashboard to see what it is before i flash to 3.0
thankyou.

Yes . In system settings.

ramzfan wrote:I flashed my stock beng to the lt+1.1 in the new firmware pkg, is it compatible with the new xgd3 games

No . You need Lt3.0 . Thats the newest .