changed laser now wont close

Anything 360 that don"t have is own tread
Post Reply
leedo55
Bandit
Bandit
Posts: 125
Joined: Sun Mar 01, 2009 8:53 pm
Location: england, uk

changed laser now wont close

Post by leedo55 »

just swapped my lite on laser for a ben q laser.

games load up great and drive ejects when button is pushed but does not close.
only way to close the drive is give it a small push then it closes and boots the game straight up.

done the outra reset stuff on jungle flasher and power xbox on and off a few times but still the same drive just doesnt close.

any ideas?
User avatar
sas67
Possible Ally of Robinhood
Possible Ally of Robinhood
Posts: 319
Joined: Wed Feb 18, 2009 2:29 pm
Location: sunny scunny,uk

Re: changed laser now wont close

Post by sas67 »

are the cables in properly?
strange one this,keep us informed
flash all phat's and slim drives upto 1175fw.awaiting delivery of cr3lite

Image
User avatar
yamackbuddy4
Possible Ally of Robinhood
Possible Ally of Robinhood
Posts: 83
Joined: Sun Apr 11, 2010 5:52 pm

Re: changed laser now wont close

Post by yamackbuddy4 »

Try replacing the drive belt. You can use small black rubber bands for this.
Image
User avatar
moonknight
Possible Ally of Robinhood
Possible Ally of Robinhood
Posts: 323
Joined: Mon Mar 31, 2008 5:12 pm

Re: changed laser now wont close

Post by moonknight »

yamackbuddy4 wrote:Try replacing the drive belt. You can use small black rubber bands for this.
Yep. I use the ones girls use for braids, the small black ones that come about 500 in a pack for a dollar. They look small, but stretch to fit quite well. There are assorted sizes in the bag.

Pic-

http://imgur.com/a1FsX
User avatar
parminder
Ally of Robinhood
Ally of Robinhood
Posts: 695
Joined: Wed Nov 28, 2007 1:23 pm
Location: Birmingham/uk

Re: changed laser now wont close

Post by parminder »

Sounds like the firmware's intact seeing it will close with a gentle push. Like the guys said try checking if the cables are all secure and connected and if possible get hold of the drive belt from another same drive and see what happens. let us know how you get on.
flashed 16 benQ, 8 Sams25, 3 sam28, 2 hit 0059dj, 2 0047dh 3 0047dj, still stuck on 0078fk, failed 0047dj hardware

Image
Post Reply

Return to “General information”