Re-Soldered Clipped 5th Pin

Post Reply
User avatar
Backslash
Possible Ally of Robinhood
Possible Ally of Robinhood
Posts: 744
Joined: Sun Jan 04, 2009 1:51 am
Location: New York
Contact:

Re-Soldered Clipped 5th Pin

Post by Backslash »

Well earlier i set out on fixing my bad hard mod of a battery that i used to mod my PSP, and i have done it. I used a dremel to get to the trace better, i put a blob of solder on the pin and pad and voila turned it on, and checked in PSP Tool, the battery is a Normal Battery once again.

By the way, It was sheer luck I got this to work. =)

Here's some photos of my craftsmanship.
Image
Image
Image
Image
Image
Image
User avatar
lilrevuk
Ally of Robinhood
Ally of Robinhood
Posts: 842
Joined: Thu Dec 20, 2007 6:35 pm
Location: Notts. UK

Re: Re-Soldered Clipped 5th Pin

Post by lilrevuk »

Good work dude. See, I told you it could be done :oops:
Image
Image
And if at first you don't succeed..? Order the damn card! :Phttp://tekgems.com/Products/la-pci22-vt6421a.htm
Mirc is a place to chat, post up on the site for help!!!
User avatar
cyantific
Ally of Robinhood
Ally of Robinhood
Posts: 494
Joined: Sun Jun 08, 2008 7:07 pm

Re: Re-Soldered Clipped 5th Pin

Post by cyantific »

Nice work. Wouldn't an xacto knife had worked just as well to reveal the trace?
RHPG, home away from home :)
User avatar
Backslash
Possible Ally of Robinhood
Possible Ally of Robinhood
Posts: 744
Joined: Sun Jan 04, 2009 1:51 am
Location: New York
Contact:

Re: Re-Soldered Clipped 5th Pin

Post by Backslash »

Well i used the dremel on the actual chip, so i dont know maybe next time this happens ill do it that way. :D
Image
Post Reply

Return to “General information”