*************************
************************* Hot swap with WXRipper v1.2
************************* and
************************* Stealth patch with Mulluter10
*************************
*************************
BY:: cofree @ http://www.robinhoodsplayground.com Go to the forum
-------------------------------------------------------------------------
For backing up this way you will need a dvd DL drive for your computer that you dont mind taking apart.
Get the dvd drive where you can take the top off.
You need to be able to get to the dvd out without hitting the eject button.when it is time to put the 360 game in,
You will not be able to hit the eject button or it will not work.
Put in dvd movie that is bigger than a 360 game.(I use matrix)
Open WXRipper v1.2 by clicking the icon
In the drop down pick the movie.
Find the magic number.
Up top in the "FILE" Save layout file.
Go to where you saved the layout file.Now change the layout file.The 3rd line is what you have to change.
Changs the C to a D (it must be in CAPS) AND SAVE this change.
Up top under "FILE" LOAD(open) THE NEW LAYOUT FILE.Make sure that the 3rd line now has the cap "D" instead of the c.
At this point "stop drive spin".Give it about 5 sec for the spin to stop.
Now swap movie for the 360 game by taking off the top cover of the drive.
Put the cover back on.
Hit spin drive.Give it about 5 sec to spin up the drive.
start dump
It will do the dump.It does it pertty fast
----------------------------------------------------------------------------
Fixing with xdvdmulleter10
You need to fix the iso with XDVDMulleter 10 before you can play this backup.doing this puts the stealth files
in the iso that MUST be in.This is done in a attemp to stop M$ from dectecting the backup.
open Muller10
Put the dot in "view iso details" Then click next
Select the "load from file" Click the Browse button and load you dumpped game iso
It may take a min to load the game iso.After it's loaded click "next" (say no to the pop up"video file is broken")
When/if the "pfi file is broken "click "yes"
Go to the tad "crc checking" Then "click autofix"
When/if "ss file is invalid" click yes
When/if "iso and checksum" click yes
That should be it
close out
"IT IMPORTANT TO CHECK YOUR ISO"
Reopen muller.
Put the "dot" in "view iso detail" then click next
You do the same as above.load the iso from file.Then click next.
You should get all checks under xtreme compatibilty
I would also check the iso with XBC v2.7 to be as safe as possible.All of these programs are available at 360 programs downloads at
http://www.robinhoodsplayground.com/for ... f=112&t=48
When you burn with img burn you will need to go into tool,setting and write to set the layer break at 1913760.
There is a guide for burning with Img burn here.
http://www.robinhoodsplayground.com/for ... f=112&t=48
*******************
*******************
******************* Thanks
******************* To everyone that keeps the 360 modding going strong.
*******************
******************* If there is anything I can do to help just let me know.
*******************
*******************
