Erased Liteon Iprep won't load FW

Post Iprep 101 things here.
Post Reply
User avatar
dustman1995
Bandit
Bandit
Posts: 166
Joined: Sat Mar 07, 2009 11:16 am
Location: Youngstown, OH. Home of Kelly Pavlik

Erased Liteon Iprep won't load FW

Post by dustman1995 »

Hey guys,
Erased my liteon with JF and of course it froze up, (even with my new setup) very disapointing. So I have the hacked Lite_CFW.bin file built with the new LT firmware. Now when I go to load it into Iprep 11.6, it gives me an error that says

' A valid firmware source was not selected
Only Non-Patched firmwares can be loaded'

Can someone please point me in the right direction?
Life is full of influences, It's your application that sets you apart.
User avatar
dustman1995
Bandit
Bandit
Posts: 166
Joined: Sat Mar 07, 2009 11:16 am
Location: Youngstown, OH. Home of Kelly Pavlik

Re: Erased Liteon Iprep won't load FW

Post by dustman1995 »

Ok, here's what I did so far. I opened up the usb bootable drive and manually put in hacked firmware with the key into that folder. and in the backup folder 1234567/12345/ put the L74 CFW.bin in that was loaded previously from IPREP 11.6 then did write only. It brought my drive back to life, as in I can nowopen and close thetra but it won't play games. I'm doing something simple wrong butI don't know what it is. Help.
Life is full of influences, It's your application that sets you apart.
User avatar
cainhunpi
Trusted Member
Trusted Member
Posts: 422
Joined: Sat Jan 31, 2009 6:31 pm

Re: Erased Liteon Iprep won't load FW

Post by cainhunpi »

when I froze mine I used this tutorial

http://www.robinhoodsplayground.com/for ... 197&t=7041


It would not work with iprep 11, I had to find a copy of iprep 9 in some website that I can't remember right now
Image
User avatar
dustman1995
Bandit
Bandit
Posts: 166
Joined: Sat Mar 07, 2009 11:16 am
Location: Youngstown, OH. Home of Kelly Pavlik

Re: Erased Liteon Iprep won't load FW

Post by dustman1995 »

IPREP 9. OK I'll try that. If it doesn't load the new LT I'll just put in 1.6 CFW . Thanks
Life is full of influences, It's your application that sets you apart.
Baja
Squire
Squire
Posts: 46
Joined: Fri Mar 28, 2008 4:54 pm

Re: Erased Liteon Iprep won't load FW

Post by Baja »

when you stick the cfw into the folder on ur flash drive, r u replaceing it and renaming it with the cfw thats in the folder? i had this happen a few weeks ago and turned a drive into a vegetable but the key is to replace the cfw file with the 1 u patched in jf that way iprep finds that 1 for the flash afterwards, do a re-read and confirm that file in jf to make sure its all up to snuff
Vdizzle
Peasant
Peasant
Posts: 2
Joined: Mon Mar 29, 2010 6:21 pm

Re: Erased Liteon Iprep won't load FW

Post by Vdizzle »

Im having the same issue and have been trying various things for hours!

In Iprep am i supposed to load the .bin i have created in JungleFlasher? If so get the same error below each time:

"A valid firmware source was not selected
Only Non-Patched firmwares can be loaded"

I tried to skip this stage (as i wasnt 100% i had to do this) and made a bootable usb with the bin file in the correct folder 1234567>12345

But when i ran L74 1234567 12345 W i am told that this is an invalid command!

Any ideas? any help? Would be much appreciated.
Vdizzle
Peasant
Peasant
Posts: 2
Joined: Mon Mar 29, 2010 6:21 pm

Re: Erased Liteon Iprep won't load FW

Post by Vdizzle »

Sorry people. Sorry to be a pain and my first post to be begging for help but i'm completely at a loss for what to do.

Any advice would be welcome.

Thanks
Post Reply

Return to “IPreP”