iprep 12.2 with benq

Post Iprep 101 things here.
Post Reply
slick8
Bandit
Bandit
Posts: 62
Joined: Mon Dec 24, 2007 8:04 pm

iprep 12.2 with benq

Post by slick8 »

is there a tutorial using 12.2? is there anything different that would be important to know??
bittersuit_98
Bandit
Bandit
Posts: 116
Joined: Sat Jan 10, 2009 10:01 pm

Re: iprep 12.2 with benq

Post by bittersuit_98 »

Iprep 12.2 works the same as the previous version. The only slight difference is that once you dumped the OFW, the on-screen instructions tells you to do a manual erase (enter "E"). On previous version of iprep you could just go straight to "writing" and iprep would perform the erase and the writing automatically. On the 12.2, once you are ready to flash you may skip the "erase" step but iprep will display an error message. If this is the case you only need to run the "writing" all over again and this time around iprep will perform the automatic erase and will write the 4 banks as usual.
In other words, on iprep 12.2 you may skip the "erase" step and go straight to the "write" step but you will have to do the "write" step twice.
Post Reply

Return to “IPreP”