iprep ixdef file compatible with ixtreme 1.6 and 83850c FW

[sadalius]

Here ya go gents. Hot off the presses. Just extract this into your x:\program files\iprep\resource folder and replace the ixdef.xml file thats there with this and you should be able to use ixtreme 1.6. I have not tested iprep itself with this setup, but it will create the boot media. Since this has not been tested, please consider using other methods of flashing until it has been confirmed by one of the staff as working or not.

ixDef-for-9.rar

[dalecheesy]

Sweet. Fast work as usual sadalius.

[Shootsteel]

Reporting in on this....Samsung MS25.... all good

[commando_lee]

BENQ VAD6038 drive working fine

[rkd2398]

Sweet. Fast work as usual sadalius.

Mad props man. Awesome. What else can I say, Sadalius, CoFree and all the guys who put the hard work in to make this easier for everyone else. You guys are great!!!!!!!!!!!!!!!

[commando_lee]

Here ya go gents. Hot off the presses. Just extract this into your x:\program files\iprep\resource folder and replace the ixdef.xml file thats there with this and you should be able to use ixtreme 1.6. I have not tested iprep itself with this setup, but it will create the boot media. Since this has not been tested, please consider using other methods of flashing until it has been confirmed by one of the staff as working or not.

ixDef.rar

with the new definitions can we still use the IPREP 9 to flash 1.51 and 1.6 the only reason i ask is i opend the ixdef file and seen it sayin 1.51 and 1.6 at bottom! just wonderd if im right what im thinkin

[technoe]

Yes you can use both firmwares.

[mancougar]

very much appreciated thanks

[sadalius]

This def file only supports 1.51 and 1.6 anything else, you'll get a message saying invalid firmware.

[themusicsoulchild]

Thanks Guys





benq and sammy flashed easily!

[jagough]

I still use v006 to flash my BenQ's and Sammy's cos I find it so easy to use.
With the new ixdef I can load 1.6 firmware for a samsung but when I try and load
1.6 for the BenQ I get the message saying invalid firmware

[CoFree]

I still use v006 to flash my BenQ's and Sammy's cos I find it so easy to use.
With the new ixdef I can load 1.6 firmware for a samsung but when I try and load
1.6 for the BenQ I get the message saying invalid firmware

well man
you are hi-jacking someone elses thread.
it not a big deal its just kind of rude

you need to update to
RHPG Iprep v009
http://www.robinhoodsplayground.com/for ... f=112&t=48" onclick="window.open(this.href);return false;
update the def file in that and you should be good to go.

there is very little support for older programs.

[sadalius]

Also, you might consider re-downloading the benq 1.6 firmware. I haven't tried 006 iprep, but with the latest iprep, it loads all of the fw's with no problems after putting in my updated def file.

[jagough]

well man
you are hi-jacking someone elses thread.
it not a big deal its just kind of rude

you need to update to
RHPG Iprep v009
http://www.robinhoodsplayground.com/for ... f=112&t=48" onclick="window.open(this.href);return false;
update the def file in that and you should be good to go.

there is very little support for older programs.

My apologies for hi-jacking someone elses thread
It comes from being an avid thread reader & noob poster
Thanks for the replies & help.
Keep up the good work

[azhar7]

I download the latest Toshiba Samsung hacked firmware(1.6). But when I try to use the Iprep 009 to up load it it says "NO VALID FIRMWARE LOADED". ????? Can any one help me?