Page 1 of 1

Coolrunner TX RGH chip

Posted: Wed Feb 15, 2012 11:18 pm
by moonknight
I have installed 3 of these and used a 4th to recover dvd keys, and i am impressed. This chip is fairly easy to install if you have soldering skill, and will enable the same features as a jtag to almost any console except the oldest and newest (xenon and corona boards). Boot time varies based on mobo, but the phats work almost instantaneously while the slims take about 10 seconds (avg) to boot (zephyrs suck, they may or may not work). I have used the 4th chip to recover dvd and cpu keys from 4 mobo's so far, making them usable again since they didn't come with a dvd drive when i got them. Cost is $20 per chip plus shipping. You will need something to program the chip with, I use the nandx by TX, but there are tutorials out there for building your own cable using LPT (ughh, talk about slow...).

Benefits of JTAG/RGH: play all backups from external hd (or internal if you have room) with no need to insert original disc (faster loading, no scratches to original disc), can play unsigned code for homebrew apps. Recover lost dvd keys for your 360. Mod and skin your box to look cooler than anyone else on the block.

Overall, this is an excellent investment if you keep a second xbox for offline play.

Re: Coolrunner TX RGH chip

Posted: Thu Feb 16, 2012 8:55 am
by CoFree
good stuff man
ive been going nuts at work the last few weeks

when i have some time and the wife lets me :D back in the game room
installing one of these is top of the list

if you have time post up what guides you used ;)

Re: Coolrunner TX RGH chip

Posted: Sat Feb 18, 2012 5:39 am
by Deathuntou
Yes if you could Please put up a good video tut or a nice pic step by step one that would be great I have several of them with no dvd drives from ebay and could use this to get these going thanks great work :D

Re: Coolrunner TX RGH chip

Posted: Thu Mar 01, 2012 11:22 pm
by moonknight
Well, been waiting to post back to this because it seems like every few weeks the programs used to perform the hack change, and I end up using 3 different programs to actually get the hack done.

Newly released is the J-runner program, it is very similar to jungleflash (made by the same peeps), it is an all in one program for completing the jtag or rgh hacks.

Here is the link to the program, tutorial included in the zip.... http://bit.ly/xrPyKy

Here is a video of the j-runner in action (thanks to BraveH43 at tx forums for the vid)

Items used for the install/programming are the tx nand-x usb nand programmer, the ck3-i (i used the maximus 360 extractor pro with homemade programming cable, used to program the tx coolrunner), and a clpd chip (I used the tx coolrunner rev b).

Not necessarily trying to plug tx, but their products work. The only reason I didn't use the ck3-i is that i already own 2 maximus 360 extractors, and am stubborn that way.
Next I will find the actual soldering diagrams and post them, then post a link to the freestyle dashboard install iso disc...

Re: Coolrunner TX RGH chip

Posted: Fri Mar 02, 2012 9:14 am
by CoFree
good stuff man
thanks

Re: Coolrunner TX RGH chip

Posted: Sat Mar 03, 2012 10:48 am
by moonknight
Here is the install wiring for the coolrunner. Credit to Ubergeek and Team Xecuter
This shows the wire only install (that is the method I use), but the chip does come with quick solder boards if you prefer.

Image

Re: Coolrunner TX RGH chip

Posted: Sat Mar 03, 2012 10:58 am
by moonknight
Here are pics of the slim install, again wires only method. Credit again to Ubergeek and Coolshrimp for the awesome photos.

Image

Re: Coolrunner TX RGH chip

Posted: Sat Mar 03, 2012 10:59 am
by moonknight
Do not cut excess wire, it is that length for a reason. Just loop it like this and secure it.

Image

Re: Coolrunner TX RGH chip

Posted: Sat Mar 03, 2012 11:00 am
by moonknight
This shows were to position the chip on the board for slim install.

Image

Re: Coolrunner TX RGH chip

Posted: Sat Mar 03, 2012 11:00 am
by moonknight
Another pic of the install points for a slim, by Coolshrimp:

Image

Re: Coolrunner TX RGH chip

Posted: Sat Mar 03, 2012 11:11 am
by moonknight
Install points for the nand-x, used to read/write to the nand, also to program the coolrunner chip. Nand-x does not stay installed; once hacked, the read/write can be done by homebrew programs from hacked dashboard.

These are the slim points for the nand-x:

Image

Re: Coolrunner TX RGH chip

Posted: Sat Mar 03, 2012 11:15 am
by moonknight
Here are the points for the phat. Look at the two boxes labelled nand to get relative position on the board, don't worry about the jtag points.

Image

Re: Coolrunner TX RGH chip

Posted: Sat Mar 03, 2012 11:18 am
by moonknight
And this shows the points to solder your nand-x wires to for the phat

Image

Re: Coolrunner TX RGH chip

Posted: Sat Mar 03, 2012 11:27 am
by moonknight
Video tutorial by JohnnyGunz for installing coolrunner chip in a phat console. It is pretty detailed, so if you have ever opened a 360 before you can skip as following:

Skip intro and Xbox PHAT teardown and start with the Xbox soldering: 6:30
Soldering wires to Team-Xecuter Coolrunner chip: 8:42
Soldering the Coolrunner wires to the underside of the board: 13:40





small edit
by:
cofree

Re: Coolrunner TX RGH chip

Posted: Sat Mar 03, 2012 11:39 am
by CoFree
:o :o WoW :o :o
great stuff man
thanks