Wii
Wii
Yeah I got a Wii for my girlfriend + the Wii fit balance board...
So checking the serial online I have the D2C-2 chip inside
I ordered a Wasabi v2 + Wii clip I will have to solder it myself + the F point
Hope everything go's right.
I just have a question about were you find the software for the wasabi or how does that work ...
you kan flash it using DVD but were do you get the osftware to put it in.
I think the one i bought is preflashed but in the future I wont to know how to reflash en test things myself.
So checking the serial online I have the D2C-2 chip inside
I ordered a Wasabi v2 + Wii clip I will have to solder it myself + the F point
Hope everything go's right.
I just have a question about were you find the software for the wasabi or how does that work ...
you kan flash it using DVD but were do you get the osftware to put it in.
I think the one i bought is preflashed but in the future I wont to know how to reflash en test things myself.
Re: Wii
i'm sure when there is a update for the chip you will be able to find it here.
http://www.wasabi.net.cn/index.html" onclick="window.open(this.href);return false;
http://www.wasabi.net.cn/index.html" onclick="window.open(this.href);return false;
Re: Wii
everything arrived today
The wasabi chip and the clip I still need to solder that
about those updates I was not sure if there was already software on the wasabi chip
but i will see that when i test run it.
The wasabi chip and the clip I still need to solder that
about those updates I was not sure if there was already software on the wasabi chip
but i will see that when i test run it.
Re: Wii
Wasabi V2 + Wii clip V5 solderd and installed ! + Problem ...
Wii plays original games BUT if I put in a backup it shows in the wii menu loads but then it says can't read disk.
I burned with imageburn
media = Phillips DVD-R <== Maybe here is the problem
Are there other settings i might try or just wait and order some Verbatim media ?
Wii plays original games BUT if I put in a backup it shows in the wii menu loads but then it says can't read disk.
I burned with imageburn
media = Phillips DVD-R <== Maybe here is the problem
Are there other settings i might try or just wait and order some Verbatim media ?
- Sesshomaru
- Board Warrior
- Posts: 475
- Joined: Thu Mar 27, 2008 12:23 am
- Location: Other Side of the Gate
- Contact:
Re: Wii
Keep in mind that the Memorex or Phillips name means nothing, most companies outsource their DVD's to third parties like CMC Magnetics. Verbatim and Sony are the only manufacturers I know of that make their own discs and don't outsource. Not coincidentally they make some of the better quality discs. The Media ID of the discs is what's important. You can check it in ImgBurn under Media ID or Manufacturer ID in the main program or use a program like DVD Identifier: http://dvd.identifier.cdfreaks.com/" onclick="window.open(this.href);return false;
If you get CMC Magnetics with those Wii discs, you've found your problem. You can get Taiyo Yuden or Verbatim DVD media cheap at places like http://www.supermediastore.com" onclick="window.open(this.href);return false; http://www.newegg.com" onclick="window.open(this.href);return false;
If you get CMC Magnetics with those Wii discs, you've found your problem. You can get Taiyo Yuden or Verbatim DVD media cheap at places like http://www.supermediastore.com" onclick="window.open(this.href);return false; http://www.newegg.com" onclick="window.open(this.href);return false;
Re: Wii
Since most other companies outsource their disk making, that actually means alot to me as far as quality goes. It doesn't bother me that they outsource them. Just that they don't hold them to a strict standard just so they can get them done cheaper.
Sadalius
No questions by PM please
No questions by PM please
- Sesshomaru
- Board Warrior
- Posts: 475
- Joined: Thu Mar 27, 2008 12:23 am
- Location: Other Side of the Gate
- Contact:
Re: Wii
Taiyo Yuden media made in Japan is pretty much the best on the planet imo, I've been using it for about 3 years now. Sony's own media ID is decent, but it's a far cry from Yuden media. Verbatim's are good, for DVD-5 media, they are not in the same league as Taiyo Yuden. I wish TY made Dual Layer media, though the MKM dyes are pretty damn good.
Re: Wii
ooh nice great info !
I used some old PRINCO disks and burned it with a speed of 2.4 and it worked, then I tryed again with the philips Dvd again on 2.4 and it worked also.
Think I burned the first time with a speed of 5 ans that gave me the not readable disk.
Another question is if there is something like homebrew (for psp) out there to instal on the wii ?
I used some old PRINCO disks and burned it with a speed of 2.4 and it worked, then I tryed again with the philips Dvd again on 2.4 and it worked also.
Think I burned the first time with a speed of 5 ans that gave me the not readable disk.
Another question is if there is something like homebrew (for psp) out there to instal on the wii ?
Re: Wii
i think so.
sadalius is the big boss on the wii.
lets see what he says.
a quick google found some sites that talk about a homebrew channel
sadalius is the big boss on the wii.
lets see what he says.
a quick google found some sites that talk about a homebrew channel
Re: Wii
The homebrew scene for the wii is pretty much exploding right now. Depending on what firmware version you have at the moment, you can install something called the homebrew channel that will allow you to load homebrew from a SD card in the front sd card slot. Then you can get the homebrew browser and browse all homebrew apps and download and install them at will, or even delete them. Check out http://www.wiinewz.com" onclick="window.open(this.href);return false; for more homebrew info.
Sadalius
No questions by PM please
No questions by PM please