Another flashing to LT 2.0 question

The place to ask your questions about the Xbox 360
Post Reply
crosstip
Peasant
Peasant
Posts: 5
Joined: Sat Oct 17, 2009 10:45 pm

Another flashing to LT 2.0 question

Post by crosstip »

OK, need some help / clarification. My Liteon was on LT 1.9 and was on 13146 dashboard. Son took it upon himself to update to 13599. Drive was not reset to stock before he did so. After the drive was flashed to LT 2.0, the drive will not read XGD3 backups. What usually happens is after the disc is inserted, dashboard shows PLAY GAME. Once pushed the screen goes black for 5-7 seconds and returns back to the dashoard. I flashed my burner with Max Burner and used the original Memorex DVD+R DL discs and still get the same result.

What options do I have at this point to be able to play my backups? Can I revert back to stock, update to latest dash and then reflash to 2.0 again? Do I need to replace the dvd drive? Really frustrating at this point and any help would be greatly appreciated.
User avatar
warship
Bandit
Bandit
Posts: 87
Joined: Sun Jul 12, 2009 10:44 am
Location: Nottingham

Re: Another flashing to LT 2.0 question

Post by warship »

As long as you have backed up your dummy key you have no problem,just flash back to stock do the update then flash to LT 2.0 and your good to go,hope that helps.
Regards

Warship.
crosstip
Peasant
Peasant
Posts: 5
Joined: Sat Oct 17, 2009 10:45 pm

Re: Another flashing to LT 2.0 question

Post by crosstip »

thanks so much! will give it a try when my usb360 gets in
Post Reply

Return to “Beginners”