Jungle Flasher

The place for more technical questions about modding your Xbox 360!
Post Reply
lunder09
Peasant
Peasant
Posts: 1
Joined: Fri May 21, 2010 11:54 am

Jungle Flasher

Post by lunder09 »

okay, im sorry if this is in the wrong section, but i am in desperate need of help. i install the latest jungle flasher, portIO32, and put the necessary firmware in the correct folder. once this is complete, i use the ck3 PRO, and the PROBE to flash a 7 series liteon drive. the first goes succesful, no problems at all. then when i go to do another, it freezes when i press the dvdkey32 button. i can switch the ck3 off and back on and it will complete and return with the status "serial data is bad". so i figured that maybe something was wrong with the drive? WRONGO, the next 7 series does the exact same thing. so i reformatted windows, and it does the flash perfectly again. then when i do another, it freezes again. somebody please give me some suggestions.
here are my specs:

MOBO - ASUS P4P800-VM
PROCESSOR - INTEL P4 3.0ghz
VIDEO CARD - HIS ATI HD 4670
HDD - WD 2.0tb
RAM - 4.0g

Thank you.
User avatar
louisM92
Ally of Robinhood
Ally of Robinhood
Posts: 814
Joined: Fri Jan 16, 2009 8:46 pm
Location: The Port, not far away from the forrest :)

Re: Jungle Flasher

Post by louisM92 »

are you using a via card mate?
Image
Need your drive flashed? PM me to sort something out ;)
OR email me at louismoylan@live.co.uk
Flashing in the UK
Also do drive replacements :)
Post Reply

Return to “360 DVD Drive Flashing”