Blaster v1 on a BenQ

Let us see what you've done to your Xbox 360 that makes it your own!
Post Reply
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Blaster v1 on a BenQ

Post by CoFree »

Blaster v1 on a BenQ

well guy i put a 360 Blaster v1 on my BenQ drive.
It went perfect.
Did a dump and flash.Alls well.
Here are some pictures of the install.
Image
Image
Image
Image

There is one small point i would like to make.The place where you mount the small board on the back will no stick down.The added HDMI port makes this impossible.
:o :o :o
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
sadalius
Robinhood
Robinhood
Posts: 4039
Joined: Wed Nov 07, 2007 6:06 pm

Re: Blaster v1 on a BenQ

Post by sadalius »

I like the blaster, but if you study what it is, you could easily make one using just a couple of sata extension cables and some minor cosmetic mods to the case. But thats why people like the blaster, there are no case mods to do to install it, plus the added benefit of having an on/off switch and molex power connecter makes life a little easier too.
Sadalius

No questions by PM please
User avatar
Jman 31
Ally of Robinhood
Ally of Robinhood
Posts: 916
Joined: Wed Nov 07, 2007 2:51 pm
Location: Somewhere in the south

Re: Blaster v1 on a BenQ

Post by Jman 31 »

I think it also has a mode b switch for the hit drive doesn't it?
ROBINHOOD'S PLAYGROUND
sadalius
Robinhood
Robinhood
Posts: 4039
Joined: Wed Nov 07, 2007 6:06 pm

Re: Blaster v1 on a BenQ

Post by sadalius »

It sure does. Shame on me..... But, the mode b switch doesn't work on 78 or 79 hits. The original one had problems with certain versions of hits to, so you had to solder in the "FIX" PCB. The new ones don't need the "FIX" though.
Sadalius

No questions by PM please
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: Blaster v1 on a BenQ

Post by CoFree »

the v2 blasters make you power the drive with the 360 :cry:
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
rkd2398
Possible Ally of Robinhood
Possible Ally of Robinhood
Posts: 833
Joined: Thu Mar 05, 2009 7:35 pm
Location: FL

Re: Blaster v1 on a BenQ

Post by rkd2398 »

I'm confused, will this work with the HDMI version?
[url=http://www.xboxlc.com/profile/rkd2398[/url]
Image


Please No Questions by PM, Use the board that's what it's for.
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: Blaster v1 on a BenQ

Post by CoFree »

mine does
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
User avatar
technoe
Ally of Robinhood
Ally of Robinhood
Posts: 1767
Joined: Wed Jan 14, 2009 2:30 pm
Location: Clarksville, TN

Re: Blaster v1 on a BenQ

Post by technoe »

The Blaster NE is a joke compared to the V1, there's no way to power the drive on and off again like you need to.
Image
Today Money, Tomorrow the WORLD!!
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: Blaster v1 on a BenQ

Post by CoFree »

yea
i will not even use the ne blaster
but
love the v1
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
Post Reply

Return to “Cosmetic Case Mods”