DVD case covers

Let us see what you've done to your Xbox 360 that makes it your own!
Post Reply
User avatar
The NdN Kid
Bandit
Bandit
Posts: 102
Joined: Sun Mar 22, 2009 12:23 am
Location: Tacoma, Wa
Contact:

DVD case covers

Post by The NdN Kid »

Can you cut the cover to the DVD drive I know you have to keep the magnet disk in the middle but if I kept that there could i cut some off the top or would it wreck the drive?
Image

Image
Hackedit
Bandit
Bandit
Posts: 144
Joined: Tue Aug 05, 2008 8:49 pm

Re: DVD case covers

Post by Hackedit »

I have actually taken the magnetic disk off of another drive and just leave the cover off. you do not need the case fully assembled. Fair warning try to stay clear of the drive as any movement of it while the disk is spinning may cause the disk to jump off and you do not want to be around if that happens.
Image

"It's really not fair for conscious beings to be aware of their own mortality."
User avatar
The NdN Kid
Bandit
Bandit
Posts: 102
Joined: Sun Mar 22, 2009 12:23 am
Location: Tacoma, Wa
Contact:

Re: DVD case covers

Post by The NdN Kid »

So what would you suggest to use to cut the metal cover?
Image

Image
Hackedit
Bandit
Bandit
Posts: 144
Joined: Tue Aug 05, 2008 8:49 pm

Re: DVD case covers

Post by Hackedit »

Maybe a dremel, or even a router if you have the right bits.
Image

"It's really not fair for conscious beings to be aware of their own mortality."
User avatar
The NdN Kid
Bandit
Bandit
Posts: 102
Joined: Sun Mar 22, 2009 12:23 am
Location: Tacoma, Wa
Contact:

Re: DVD case covers

Post by The NdN Kid »

Thanks a lot used a Dremel I think it turned out great check it out I posted pic under cosmetics 360 forum under red on red
Image

Image
Post Reply

Return to “Cosmetic Case Mods”