Iprep Error Msg When Trying To Prepare USB Boot Flash Drive?

[CoFree]

Yeah ever since installing 007 the going back to 6.2, 6.2 don't work now

thats the first step man.
get iprep v007 uninstalled.
install the v006.2 beta.

then get a dump of your dvd drive.
that is first

if you have a copy of your orig frmware you could do a restore on the drive to get it back to stock.
i would only do that if it will not play orig game at this point
let us know how it goes

[Bonfon5]

It plays fine it did not harm the xbox.I'm going to do it right now and we will see what happens,I'll be asking ?'s all week cause I have 3 Xbox's to flash with all different drives...LOL...Ms28...Benq...and ms25....so I'll let you know...Thanks guys your my Idol...LOL

[CoFree]

iprep will do all of those drive just fine.
Make sure after the dump of each you restart in windows and check the ofw with firmware toolbox to make sure it have a good key.
then make a copy of that ofw
then do the flash.
dont lose that orig key.

[Bonfon5]

Now when i go to dump it stays on status 0x7f even after i power the xbox on...LOL...I can't beat this..cofree i'm using you tut. video and it's a great vid it just gets stuck on 0x7f...on the second computer i'm using....first 1,dell dimension 3000 i tried it on,and now dimension c521...both the same,stuck on 0x7f ...

[CoFree]

as long as you are using the sata card i said.
then the next thing to is try a different usb flash.
if you have to build the iprep on a floppy disc and try to get the dump.it would let you know that its working
dont flash that way unless there is no other way to get it.

[Bonfon5]

what kind of computer do you use to flash i see you have a dell monitor but what kind of tower....btw i'm going to buy a different usb drive right now...Thanks I'll let you know in a few hours how it's going

[CoFree]

a 2.4 dell
just get a small flash.so far all the Kingston flash drives aver worked for me.

[Bonfon5]

I seen that you used serial 1234567 12345 do you use that for all or is that and example....it says to use your serial number but why did you use 1234567 12345...thanks and I just bought a 1gb office depot usb drive...trying now

[CoFree]

the 12345 is just for the video
when i flash a new console i use the real ser number.it help me keep up with who is who.

[Bonfon5]

ok i tried the regular serial number and it's still is stuck on 0x7f...i'm gonna upload a video to show you what it is doing....

[CoFree]

i have a good idea of what its doing.
the ser wont mater as long as the first number are 7 long and the last is 5.

if its just hanging and not flashing the D1.
here is a list of hat to try.

D1 not flashing (for BenQ) :
What that means is the computer is not seeing the 360 drive.There are many different thing that can be causing this problem.
Chipset will not work.Most sata ports on the mobo will not work.
Try a different port on your sata card.The port closest to the front most of the time is the one to use.
Try a different sata card.This is a card that is known to work
http://tekgems.com/Products/la-pci22-vt6421a.htm" onclick="window.open(this.href);return false;
Try a different sata cable
Put the sata card in a different pci slot
I would try this just for kicks before the next step.Try a floppy maybe that will do it (don't hold your breath)
You may even need to try a different computer.This is rare how ever it will happen some time.

[Bonfon5]

Ok I have the via card already...lol..check this video out...this is the second computer i'm trying it on...running out of options...LOL..

http://video.google.com/videoplay?docid ... 5483&hl=en

Sorry for the low quality cam setting were set on low at the moment...

[sadalius]

You don't have the sata cable connected to the back of the card do you? If so, try connecting it to the first port on the card, the one closest to the front of the computer and see if it will dump. Kind of hard to tell from the video where its plugged in at.

[CoFree]

what is going on is the computer is not seeing the 360 drive for some reason.
sadaloius is on the money with the sata cable.
one more thing is
you have to build the usb flash iprep on the computer that is going to be hooked up to the 360.
that way the port info will be right.

after you have tried all the option
different sata port
pci card in a different pci slot.
if the computer has a floppy try that.
build your iprep on the floppy and see if you can get a dump.dont flash just try to get a dump.

[Jman 31]

Also understand that the sata port that you are going to use is on the inside of your computer most likely. I had a hard time seeing it on the video you posted, but it looked like you had it plugged to the exterior port. Sorry if that's not the case.