lite-on.......It could be looking up.....

The place for more technical questions about modding your Xbox 360!
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: lite-on.......It could be looking up.....

Post by CoFree »

crap.i new he logged the data stream from/to the 360.haha
brain fart. :oops:


this is from a day or two ago.

"<c4eva> the end is near for lite-on!"
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
aasgaurd
Peasant
Peasant
Posts: 7
Joined: Fri Jul 25, 2008 1:02 pm

Re: lite-on.......It could be looking up.....

Post by aasgaurd »

hi cofree this is good news i am now on tender hooks waiting i guess i can wait a little longer also
User avatar
Digital Menace
Trusted Member
Trusted Member
Posts: 459
Joined: Sun Mar 02, 2008 4:27 am
Location: Midwest

Re: lite-on.......It could be looking up.....

Post by Digital Menace »

all i hope is that i can flash it like i flash my benq, which will probably be the case right ?

just a normal software flash, i hope anyway.

if the arcades go down to $199 in september like i've read i will almost definitely get one soon as the lite-on gets ixtreme which sounds like soon.
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: lite-on.......It could be looking up.....

Post by CoFree »

there is no telling how/if it will be flashed.
at this point
i just hope he can get it whipped. :D
i dont care how we have to do it.
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
nelex
Peasant
Peasant
Posts: 11
Joined: Thu Jun 26, 2008 5:05 pm

Re: lite-on.......It could be looking up.....

Post by nelex »

They succesfuly dumped dvd key.....Soon spofing will be possible......
Image
<+c4eva> dvdkey extraction successful on liteon, key update/write to any drive successful(liteon included), work continues to dump/write fw
<@c4eva> dos not needed anymore, drive off/on not needed for benq, new all benq unlock also complete
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: lite-on.......It could be looking up.....

Post by CoFree »

good post man
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
User avatar
parminder
Ally of Robinhood
Ally of Robinhood
Posts: 695
Joined: Wed Nov 28, 2007 1:23 pm
Location: Birmingham/uk

Re: lite-on.......It could be looking up.....

Post by parminder »

yeh good post
flashed 16 benQ, 8 Sams25, 3 sam28, 2 hit 0059dj, 2 0047dh 3 0047dj, still stuck on 0078fk, failed 0047dj hardware

Image
User avatar
NeoRio
Trusted Member
Trusted Member
Posts: 488
Joined: Sat Dec 15, 2007 1:16 pm
Location: Freed From The Matrix

Re: lite-on.......It could be looking up.....

Post by NeoRio »

What?---are we agreeing that the Lite-On has been conquered and can now be flashed?
Image
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: lite-on.......It could be looking up.....

Post by CoFree »

NeoRio wrote:What?---are we agreeing that the Lite-On has been conquered and can now be flashed?
no i am not saying that,but
i am getting my hopes up some. ;) :D
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
nelex
Peasant
Peasant
Posts: 11
Joined: Thu Jun 26, 2008 5:05 pm

Re: lite-on.......It could be looking up.....

Post by nelex »

Ok, this is first public tutorial and its not detailed,only for experts.......

Code: Select all

DVD key grabber for Benq and Lite-on

It receives DVDkey from drive serial port and save to file, you need a LVTTL-RS232 converter (max3232) between COM1 (embedded COM1 on motherboard, 0x3F8 IRQ4) and TX RX pins on drive power cable (for liteon the trace to powercable are cut, need a little soldering).
It also saves identify.bin and inquiry.bin, for the spoof lovers.

This "unlocks" also Benq to accept MTK vendor ATA cmds (dosflash etc...), not for liteon

You must power on PC without sata cable connected to drive.
You must poweron the drive with tray half opened and eject switch in open state.
You must power off an on again the drive each time you run the app.

For rs232 troubleshuting, consider that Liteon  by default outputs an endless stream of 0x00 and 0x01 at 115200 8N1, you should see it with Realterm with display set to hex



As always, us at your own risk


Thanks and respect to Tiros, Schtrom, TMF, Redline99, c4eva


Geremia

DVD key grabber for Benq and Lite-on :
http://www.mediafire.com/?sharekey=85c2 ... b9a8902bda
User avatar
MsK
Ally of Robinhood
Ally of Robinhood
Posts: 652
Joined: Tue Jan 08, 2008 3:42 pm
Location: Nottingham / UK

Re: lite-on.......It could be looking up.....

Post by MsK »

I did put this in our irc chan for discussion earlier today but no1 was around // afk
[13:09] <[MsK]> http://www.xboxhacker.net/index.php?top ... 0#msg66009" onclick="window.open(this.href);return false;
[13:09] <[MsK]> hmm
[13:13] <[MsK]> <+c4eva> dvdkey extraction successful on liteon, key update/write to any drive successful(liteon included), work continues to dump/write fw
[13:14] <[MsK]> <@c4eva> dos not needed anymore, drive off/on not needed for benq, new all benq unlock also complete
The original thread has since been split to : http://www.xboxhacker.net/index.php?topic=10204.0" onclick="window.open(this.href);return false;

I have some max chips lying around but sadly no drive to test!
Image
User avatar
Digital Menace
Trusted Member
Trusted Member
Posts: 459
Joined: Sun Mar 02, 2008 4:27 am
Location: Midwest

Re: lite-on.......It could be looking up.....

Post by Digital Menace »

ehh i hope it gets easier, seems kinda hard.

what's all needed ? any specific mobo on ur pc ?

you have to solder too right ?

:?
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: lite-on.......It could be looking up.....

Post by CoFree »

have a look here.
this is our working thread on the lite-on.
dont post question there.new information is fine.
viewtopic.php?f=63&t=2429" onclick="window.open(this.href);return false;
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
aasgaurd
Peasant
Peasant
Posts: 7
Joined: Fri Jul 25, 2008 1:02 pm

Re: lite-on.......It could be looking up.....

Post by aasgaurd »

you mean to say i need to do all that to get the dvd key damn im no good at soldering and trying to get the things as well is a bit hard as i live in the uk
sadalius
Robinhood
Robinhood
Posts: 4039
Joined: Wed Nov 07, 2007 6:06 pm

Re: lite-on.......It could be looking up.....

Post by sadalius »

If you look on xboxhacker.net at the thread they have on the subject, you'll find links to places that sell the card in the UK. But yeah, the soldering will be the problem with this one. Although with a little practice, you should be able to do it pretty easily from what I can tell anyway. I don't have a liteon to experiment with, plus, I don't have the means to get one of those cards as of yet. I may get one a little later, but there are a few on this board that's getting them so I would say it won't be long till you'll see a guide on dumping the liteon and spoofing another flashed drive to take its place.
Sadalius

No questions by PM please
Post Reply

Return to “360 DVD Drive Flashing”