I wanted to know if it was harmfull to conncet one of the fans to a 12v spot on your board.
I was planning on adding a wire to this spot:
So one of the fans would run allot faster. Does this cause any harm to the system?
Soldering a 12v current to the fan
- Freebeer187
- Bandit
- Posts: 108
- Joined: Wed Nov 28, 2007 11:48 pm
Soldering a 12v current to the fan
cofree is the best!
Xbox360 Arcade W/ Benq = pwnd.
Xbox360 Arcade W/ Benq = pwnd.
Re: Soldering a 12v current to the fan
there are people that do the 12v mod.i have never done it.
i dont think that is where they get the 12v from.ill do some looking around.
i put this in every 360 i take apart.It does work and it looks cool.it will keep it 10-15 deg cooler
http://www.consolesource.com/ecomm/cata ... -2581.html
they come in blue,red and green
i dont think that is where they get the 12v from.ill do some looking around.
i put this in every 360 i take apart.It does work and it looks cool.it will keep it 10-15 deg cooler
http://www.consolesource.com/ecomm/cata ... -2581.html
they come in blue,red and green
Re: Soldering a 12v current to the fan
yea
that is the right place.
looks like that is the same picture i saw.
here is a guide if you dont have one.
http://www.llamma.com/xbox360/mods/360-12V-fan-Mod.htm
that is the right place.
looks like that is the same picture i saw.
here is a guide if you dont have one.
http://www.llamma.com/xbox360/mods/360-12V-fan-Mod.htm
- Freebeer187
- Bandit
- Posts: 108
- Joined: Wed Nov 28, 2007 11:48 pm
Re: Soldering a 12v current to the fan
Just installed it. Works great! A little loud but its going to keep my 360 much cooler... For now at least. Ill prolly pick up one of the fans u showed me
cofree is the best!
Xbox360 Arcade W/ Benq = pwnd.
Xbox360 Arcade W/ Benq = pwnd.