Problems flashing benq drive

[MRWHITE35]

I watched the video tutorial on here, I read the benq drive ok so I got my original firmware, but when I tryed to flash the drive it just freezes on bank one, now the drive is knackered how do I put the original firmware back on?

[sadalius]

Try using the doshflash commands manually to erase it, then try flashing it.

[CoFree]

you can do this to
http://www.robinhoodsplayground.com/for ... =110&t=196

[MRWHITE35]

I've done it now many thanks reflash to original firmware and then started from scratch now working with backups
thanks

[sadalius]

ok, so from what I gather, you restored the original firmware and then re-flashed the hacked firmware. This procedure basically erases the flash and writes the firmware which was my suggestion, but it worked out for what you was wanting it to do congrats man!!

[MRWHITE35]

yes i used "iprep" I renamed the original bin file that I backed up, to the modified bin file so when I reflash it was flashing the original, just before I pressed the enter key to reflash, I hit the power on the Xbox a split second later and it worked okay, I then re-read the original Flash that I just put back on the 360, then flashed with modified bin it just made, hit the power on 360 a split second later and it all worked

[CoFree]

glad you got it going man