i have a lite-on drive which is locked because of lite-on erase
now when i used dosflash 1.7 , after i typed dosflash nothing happened. it didn't list the drives that i have.
do you have any suggestions on what causing the problem.
thanks in advance
after dosflash nothing happens
Re: after dosflash nothing happens
the drive doesn't do anything if the drive freezes during erase in windows...
Do the erase in dos til you get status 0x72. You can do this by adding lite on erase to an iprep flash...
I had this problem in vista, erased in dos and dosflash picked up the drive first time after the restart
Do the erase in dos til you get status 0x72. You can do this by adding lite on erase to an iprep flash...
I had this problem in vista, erased in dos and dosflash picked up the drive first time after the restart
And if at first you don't succeed..? Order the damn card! http://tekgems.com/Products/la-pci22-vt6421a.htm
Mirc is a place to chat, post up on the site for help!!!
Re: after dosflash nothing happens
the thing is that i alread did the l-o-eras.exe and i got it on 72
but after that when i type dosflash and i hit eneter it gives "Dosflash v 1.7 ..." blah blah
and nothing happens
i don't know why?
do i need to unplug all the drives or what
by the way i was following the video tutorial that cofree posted
i'm using via pci card
but after that when i type dosflash and i hit eneter it gives "Dosflash v 1.7 ..." blah blah
and nothing happens
i don't know why?
do i need to unplug all the drives or what
by the way i was following the video tutorial that cofree posted
i'm using via pci card
Re: after dosflash nothing happens
so you cycled the power on the drive? Are you using a VIA card??
Does it even open?? As I say, I would try the erase in dos, then go to dosflash, see if that makes any difference...
Does it even open?? As I say, I would try the erase in dos, then go to dosflash, see if that makes any difference...
And if at first you don't succeed..? Order the damn card! http://tekgems.com/Products/la-pci22-vt6421a.htm
Mirc is a place to chat, post up on the site for help!!!
Re: after dosflash nothing happens
make sure you power the drive off before you typoe dosflash
then power it back on after you enter that
then power it back on after you enter that