lite on solder
-
- Squire
- Posts: 38
- Joined: Wed Jan 07, 2009 4:17 am
lite on solder
ok if i have a lite on drive and a ck3 pro what exactly do i need to solder on the drive to get key. can some one post a picture.


ben Q drive: 6
samsung drive: 2
hitachi 79 drive: 2
hitachi v59DJ: 1
Lite-On drive:5
Re: lite on solder
i moved your post to the right spot man.
you would take the back of the dvd drive off and then solder the r707 point

you dont have to solder the 708 now.
you would take the back of the dvd drive off and then solder the r707 point

you dont have to solder the 708 now.
-
- Squire
- Posts: 38
- Joined: Wed Jan 07, 2009 4:17 am
Re: lite on solder
ok and then with that i can do the iprep tut right.


ben Q drive: 6
samsung drive: 2
hitachi 79 drive: 2
hitachi v59DJ: 1
Lite-On drive:5
Re: lite on solder
Yep, if you have them bridged correctly, you can run iprep and get the key 



And if at first you don't succeed..? Order the damn card!

Mirc is a place to chat, post up on the site for help!!!
-
- Squire
- Posts: 38
- Joined: Wed Jan 07, 2009 4:17 am
Re: lite on solder
well it really dont look so hard cause all you have to do is solder the r707 together right and then that sould be fine.


ben Q drive: 6
samsung drive: 2
hitachi 79 drive: 2
hitachi v59DJ: 1
Lite-On drive:5
Re: lite on solder
thats right just the r707
but
its small
and dont get any solder on anything else.
but
its small
and dont get any solder on anything else.
-
- Squire
- Posts: 38
- Joined: Wed Jan 07, 2009 4:17 am
Re: lite on solder
well i just have to give it a try thanks cofree and everybody else that has made this possible.


ben Q drive: 6
samsung drive: 2
hitachi 79 drive: 2
hitachi v59DJ: 1
Lite-On drive:5
-
- Board Warrior
- Posts: 300
- Joined: Mon Jan 05, 2009 6:01 am
- Location: England UK..where its very very cold...!!
Re: lite on solder
i had a look at soldering that point...man its so small...ive read somewher that a small 2mm jewellers screw driver can be used to bridge the two points..so you basically hold the scredriver across the two points when dumping the keys....i havnt tried that yet, im just waiting for ck3 pro and probe to come.... 

-
- Squire
- Posts: 38
- Joined: Wed Jan 07, 2009 4:17 am
Re: lite on solder
ok i got just one more question on this subject if i use the probe to get key can i still use i prep tut if i get the key with jungle flasher?


ben Q drive: 6
samsung drive: 2
hitachi 79 drive: 2
hitachi v59DJ: 1
Lite-On drive:5
Re: lite on solder
well if you us iprep the use the iprep guide or you are going to try jungle flasher then of course use the jungle guide. 

-
- Squire
- Posts: 38
- Joined: Wed Jan 07, 2009 4:17 am
Re: lite on solder
no what im asking is that if i use i prep can i still use the probe. sorry for not explaning right


ben Q drive: 6
samsung drive: 2
hitachi 79 drive: 2
hitachi v59DJ: 1
Lite-On drive:5
Re: lite on solder
yes
just after you open the dvd drive and close it half
put the probe in the hole and leave it in till you are done getting all the files.
man
I think your sig rocks
good job

just after you open the dvd drive and close it half
put the probe in the hole and leave it in till you are done getting all the files.
man
I think your sig rocks
good job




-
- Squire
- Posts: 38
- Joined: Wed Jan 07, 2009 4:17 am
Re: lite on solder
thx cofree it took some time but i like it.


ben Q drive: 6
samsung drive: 2
hitachi 79 drive: 2
hitachi v59DJ: 1
Lite-On drive:5
Re: lite on solder
thank you cofree i will try to get the xtractor and the spear probe just incase
Re: lite on solder
The first one i did,i packed blu-tac around all the points bar 707 and dropped a blob of solder on it,my eyes aren`t what they used to be.lol
Now Flashing All Drives