Iprep wont boot on removable PLEASE HELP URGENT!

[xx0warrig0xx]

I tried all the tips on this other fourm, it didnt work. On my bios menu it had a option for legacy usb mode so i enabled it. I went to boot and under removable it says Legacy floppy so i went to Harddrives and it had my (master) and it says add ons or something like that I been toying for 2 hrs is their another way to boot iprep?

PLEASE HELP

}I have a phenix/award bios i think PLEASE HELP

[cyantific]

There's a hard drive menu in my BIOS that lists them sequentially. The USB stick shows up for me there and I make it Disk 1 instead of my Raptor which is my main C:\. This way the computer looks to the USB stick first and boots it like that.

[xx0warrig0xx]

There's a hard drive menu in my BIOS that lists them sequentially. The USB stick shows up for me there and I make it Disk 1 instead of my Raptor which is my main C:\. This way the computer looks to the USB stick first and boots it like that.

i already tried that im about to pull out meh old windows 98 dell from the closet and atke a look any other advice?

[Backslash]

yep i have same bios, just disconnect all drives, and set bios to boot from usb first, then find your USb drive under HDD's and it will be caled like UHDD or something like that.

make sure raid is off, and legacy mode is on

[xx0warrig0xx]

yep i have same bios, just disconnect all drives, and set bios to boot from usb first, then find your USb drive under HDD's and it will be caled like UHDD or something like that.

make sure raid is off, and legacy mode is on

I checked where does it say to boot from usb first??/


PLEASE THIS IS URGENT sorry for yelling =P

I just need this done and spent over 150 dollers btween ck3, opening, buying used 360 xclamp etc.........

[xx0warrig0xx]

Should i just try it on a floppy?

[Backslash]

Go to your BIOS and go to Advanced BIOS Features > First Boot Device > Choose Removable

if it doesnt boot up your usb when you do it the first time, reboot and hit F10 for the boot menu and go to HDD's and choose your USB stick.

[xx0warrig0xx]

Go to your BIOS and go to Advanced BIOS Features > First Boot Device > Choose Removable

if it doesnt boot up your usb when you do it the first time, reboot and hit F10 for the boot menu and go to HDD's and choose your USB stick.

lemme try that otherwise ill post a vid of meh problem on utube

[xx0warrig0xx]

Ok im trying everything humanly possible ( i think,)) Im just going to use a floppy make life easier is their ANY OTHER WAY to do this with a usb?

[xx0warrig0xx]

ok since my computer is acting weird im using a floppy

[Backslash]

k good luck

[CoFree]

yea
let us know how it goes.

backslash
like to new sig and avatar

[Backslash]

you like it?

thanks i figured i needed a change the other thing was too dark to see on my burnt out CRT monitor...

[wong2010]

dude, just use floppy disc to boot in DOS. 1, use Iprep prepare the firmware in floppy 2, make it bootable 3 then try to restart and boot ur 3.5 floppy disc drive

P.S. USING FLOPPY DISC TO WRITE FIRMWARE, IT WILL BE SLOWER THAN OTHERS AND IT IS NORMAL

BTW USE jungleflash backup your dummy key file first

[xx0warrig0xx]

k rhpg ill use a floppy for this job but im mite gunna buy another computer with vista