Hi
i will flash my drive
i have a benq Drive and i want to know if there are any new programs or tools that i need to use because i dont remember any thing for along time
now i am back in flashing
so just want to know
BTW i have a xbox360 NTSC with HDMI built in just wanted to tell mybe there are defference in the console and using the programs
Thank you
any programs or tools need to know before i flash ?
Re: any programs or tools need to know before i flash ?
i would say get iPrep 8.8 and the new 1.51 firmware, you can find those at xbins, a ck3 lite or pro and if you don't have one already get a via 6421 card. you'll also need a flash drive.
connectivity kits
ck3 lite
ck3 pro
the card
via 6421
follow this and you should be good to go. . .
benq tutorial
connectivity kits
ck3 lite
ck3 pro
the card
via 6421
follow this and you should be good to go. . .
benq tutorial
Re: any programs or tools need to know before i flash ?
thanks 
i bought my xbox360 modded so i have to dump the key first right cus i dont have the original firmware
i want to know one more thing
i have the Sata card already
but i dont have the opening tool kit for xbox360 cus you know its kind of hard to open
where can i buy the opening tool kit
and thanks in advance

i bought my xbox360 modded so i have to dump the key first right cus i dont have the original firmware
i want to know one more thing
i have the Sata card already
but i dont have the opening tool kit for xbox360 cus you know its kind of hard to open
where can i buy the opening tool kit
and thanks in advance
Re: any programs or tools need to know before i flash ?
yea, you should follow the whole flashing process, and dumping is apart of that. once you get a good dump, back it up and then proceed to flash. i use a torx 9 and a small flat head screwdriver to get the 360 open, i wasn't paying for a toolkit. . . but you can find it on ebay if need be.
- ohnoacucumber
- Bandit
- Posts: 120
- Joined: Mon Mar 16, 2009 9:29 pm
- Location: Ohio?
Re: any programs or tools need to know before i flash ?
Hey, look around the site coffee has a nice tut for iprep 8.8 easy to follow and I believe there is a topic stickied that has what you need an they are hyperlinked to the dl sites. Happy moddding.
-cucumber

-cucumber

Re: any programs or tools need to know before i flash ?
Hiiamwatt wrote:i would say get iPrep 8.8 and the new 1.51 firmware, you can find those at xbins, a ck3 lite or pro and if you don't have one already get a via 6421 card. you'll also need a flash drive.
connectivity kits
ck3 lite
ck3 pro
the card
via 6421
follow this and you should be good to go. . .
benq tutorial
i have problems with modchip.ca
can you please give me another website that is trusted to order from ? (modchip.ca is trusted but i have issues with them)
Thank you
Re: any programs or tools need to know before i flash ?
try here, to the left they have a list of where to buy sites. . .
http://team-xecuter.com/ck3/
what was ya problem with modchips?
http://team-xecuter.com/ck3/
what was ya problem with modchips?
Re: any programs or tools need to know before i flash ?
they said that the billing address is not the same as the shipping address
i dont know what is wrong with them
i have a US mailbox thats why i put it
anyway i ordered from other site and its ok now
Thank you
i dont know what is wrong with them
i have a US mailbox thats why i put it
anyway i ordered from other site and its ok now
Thank you