Iprep ERROR Message (Help Needed Pls)

[9thwonda]

Cofree (or anyone) : "Exception Processing Message 0xc00000a3 Parameters 0x75E492A0 0x00000004 0x75E492A0 0x75E492A0"

I get this error when attempting to make the usb drive bootable thru iprep 8.8.

Operating system is Vista fyi.

How do I fix this problem? It still allows me to boot from the flash drive...but with this error I wont even try.

[CoFree]

have a look over this
viewtopic.php?f=63&t=324" onclick="window.open(this.href);return false;

[9thwonda]

Just went thru it. Don't know what your trying to get me to read but nothing is standing out to me.

[CoFree]

sorry man
here you go

Exception Processing Message :
Disable the floppy in your bios.
Most people get that error because their computer does not have a floppy drive, but it is still on in the bios.Go in to your bios and disable it.

[9thwonda]

Still didn't work. Windows - Drive Not Ready. Exception Processing Message (More numbers). Im gonna go back into my bios and make sure the floopy disk drive saved as disabled...

[9thwonda]

Fyi: I've noticed that after I get that message, if I hit "try again" it goes thru without giving the error again. Always on the second time. If I do it now it will give me the error....I hit "try again" it will go thru, should I be worried? I don't want to proceed until I know it's writing properly.

[CoFree]

you need to get that running without giving you a error

if in vista right click on iprep and run as admin
see if that takes care of it.

[9thwonda]

That doesn't work. Tried that before I made this thread. Am I the first to have this problem? Once again, it DOES show up normally in when I boot from usb...everything appears normal. This is what it says:

Preparing Destination
Making Drive E:\ Bootable (Error happens first time here)
Copying BenQ Firmware to E:\
Copying Generic Tools to E:\
Creating Batch Files on E:\
Creating BACKUPS directory
All Done!


Fyi, my drive is not hooked up at this time..please confirm that it is not supposed to be.

Also, since im still kinda at a stand still....another question:

I have a VIA sata card. I've read some talk about disabling a certain part of the driver. When I installed the PCI card vista automatically installed the driver for me. Should I be worried about that? The disk that came with my PCI card was actually ruined lol. Again I appreciate your help.

[9thwonda]

http://forums.xbox-scene.com/index.php?showtopic=632975" onclick="window.open(this.href);return false;

This guy had the same problem. Looks like he ended up booting from a floppy...I dont have a floppy drive So I gotta make this work some how..

[CoFree]

if you are using iprep then you should use the via drive

well it wont hurt anything to try and get a dump of the drive
if it will build a boot flash
just try a dump and see if you can see the dvd drive and if you can get a dump

what drive are you trying to flash

[9thwonda]

It's a benq. I figured it wouldn't hurt to at least try that step. Cool, I'll give it a shot when I get some more free time. Im more worried about the flash tho ya know.

[9thwonda]

Ok, got thru the whole first part (dumping) including saving a copy of my backups folder. Do you suggest that I start to flash? Also, while dumping the ofw, I noticed that it didn't ask me to do the "open drive/shut drive" method. Is that strange? The key still showed up when firmtool opened...

[9thwonda]

Done. Went ahead and ignored that message. Flashed the benq, playin cod5...even has 1.51 on it.

[CoFree]

yea damn good job man
i was just going to say make damn sure your key looks good then go ahead and try.