spoofing

The place for more technical questions about modding your Xbox 360!
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: spoofing

Post by CoFree »

HAZ3 wrote:comments, advice, etc? please advise & thanks again as usual
well man you are jumping all over the place
im not sure what you are trying/wanting to do.
MG3 wrote:you have to use the 0800 disk to unlock the drive to re-flash it
there is no reason to use this
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
sadalius
Robinhood
Robinhood
Posts: 4039
Joined: Wed Nov 07, 2007 6:06 pm

Re: spoofing

Post by sadalius »

Hitachi's doesn't use the 0800 disk. There was an 0800 created for samsungs and benq's, but not hitachi's. There is an unlock disk for the hitachi 79's, but it's an audio disk of a certain wav file. Not 0800.
Sadalius

No questions by PM please
MG3
Peasant
Peasant
Posts: 12
Joined: Thu Mar 19, 2009 12:58 am

Re: spoofing

Post by MG3 »

its a sammy spoofed as a hitachii with iXtrene 1.4 so yeah he does to be able to unlock the sammy drive... like you had told me before Sadalius, the spoof is only a very small bit of information that sends the drive key from another drive.

At this point his sammy drive has already been spoofed as a hit 47 and he needs to upgrade from 1.4 to 1.51, all he would need to do is unlock the sammy drive and reflash it, JF would get his correct drive key in the dump and keep the spoof. If he uses iPerp, it might be different and I do not have too much practice in it
sadalius
Robinhood
Robinhood
Posts: 4039
Joined: Wed Nov 07, 2007 6:06 pm

Re: spoofing

Post by sadalius »

Your right. With jungle and ix1.4 you would need to use the 0800 disk. Or at least the 10 second trick to unlock the drive. JF should then handle the rest all on it's own. I didn't read the whole thread, just part of it, sorry :oops:
Sadalius

No questions by PM please
HAZ3
Bandit
Bandit
Posts: 83
Joined: Thu Jan 15, 2009 7:53 am

Re: spoofing

Post by HAZ3 »

MG3 wrote:its a sammy spoofed as a hitachii with iXtrene 1.4 so yeah he does to be able to unlock the sammy drive... like you had told me before Sadalius, the spoof is only a very small bit of information that sends the drive key from another drive.

At this point his sammy drive has already been spoofed as a hit 47 and he needs to upgrade from 1.4 to 1.51, all he would need to do is unlock the sammy drive and reflash it, JF would get his correct drive key in the dump and keep the spoof. If he uses iPerp, it might be different and I do not have too much practice in it

he is correct this is essentially what I am trying to do.

originally i wanted to follow this method that haggardsmurf did: "Spoofing steps:

Dump the Firmware from the original drive (would have been your Hitachi drive)
Make sure you have a valid key in your Hitachi firmware (Its valid if its not all repeating letters/numbers)
Download iXtreme 1.51 for Samsung
Open Jungle Flasher
Load your original Hitachi firmware as "Source"
Open your iXtreme 1.51 for Samsung as Target
Click "Spoof Source To Target"
Click "Save to File"
Save it as "Samsung Spoofed as Hitachi" (Or something like that...)

Now what you have done is taken all the identification information from the hitachi firmware and put it in the samsung firmware. So your samsung runs the normal ixtreme firmware, but its identity appears to be the that of the Hitachi.

Now with that bin you just saved, you can use whatever program you would like, and flash that.

If you use iPrep, put it in the 1234567\12345\ folder.
If you use Jungle Flasher (If you dont close it after spoofing) you can just go to the MTK tab and flash. (If you have closed since spoofing the firmwares, then just open your hitachi FW as source, and your 'Samsung Spoofed as Hitachi' as target)
" Yea sorry for the late reply, you would have to rename it to use it in iPrep" this was per this thread viewtopic.php?f=63&t=4891&st=0&sk=t&sd=a" onclick="window.open(this.href);return false;

now do you think this would work as well? If so, i know for a fact I'd have do the following as well: viewtopic.php?f=63&t=4351" onclick="window.open(this.href);return false;

Now, if the latter is not needed then, I'll go the original route that mg3 suggested. please advise. thanks
HAZ3
Bandit
Bandit
Posts: 83
Joined: Thu Jan 15, 2009 7:53 am

Re: spoofing

Post by HAZ3 »

bump :oops:
MG3
Peasant
Peasant
Posts: 12
Joined: Thu Mar 19, 2009 12:58 am

Re: spoofing

Post by MG3 »

Sounds like you are trying to make it a little too difficult than it is. If I am not mistaken (and if I am please correct me) you will not need your hitachi firmware for this upgrade and you will not need to respoof it. The data is already there and will pretty much stay there as you are upgrading.

Steps on what I recommend you do:
Burn the activate.iso (0800) and put it in your Xbox 360 drive while it is connected to the PC
Open JungleFlasher and go to MTKFlash and click on Intro /Decive ID
Drive should be in vendor mode at this time
Now Read Firmware and save as OFW
Load the OFW and the 1.51 firmware in Firmware Tool
Click Spoof Source to Target f not done automatically and verify all the drive keys and data are unique and identical
You should notice that it will also poin out that the Sammy drive is still Spoofed as a Hitachi
Save the new CFW
Go to MTK Flash and Click on Write on the bottom right.


I hope that helps, I took this straight from the JunglFlasher v1.51 PDF that was posted in the tutorials section.
Good Luck
Post Reply

Return to “360 DVD Drive Flashing”