need help how to flash benq mechanic with fw 64930C

[bob0190]

please help how to flash this mechanic benq with 64930C fw ?
thanks for help
i have via card 6421a

[CoFree]

first read this and check out this video.
viewtopic.php?f=110&t=662
viewtopic.php?f=110&t=277

after that you will know just what you need help with

[bob0190]

o.k
but i heve problem with iprep 101 v006 afrer read firware all 4 bank o.k ,
no more next step automatick maybe free usb ?
firmtool make not the hacked firware this my problem .........
but i have my orig.bin from mechanic but i dont now or is goor or bad this orig.bin
sorry for my english

[Jman 31]

Man, this is going to be a tough one with the language barrier. To check the original firmware dump check out this tutorial. http://www.robinhoodsplayground.com/for ... =110&t=349 . Also if you could give us an idea of what "mechanic" is that you are talking about. Also what you mean by "free usb". Sorry if this is frustrating for you but we can't help you if we don't understand what you are asking. Are you using a via sata card? can you take a picture of your setup and post it, and maybe a picture of the error screen if you are getting one?

[bob0190]

i have sata via card ,, now i have check my orig.bin firmwere in toolbox 4.6 and
my key is 255A8C*&^^*&^*&^*&^*&^*&^*& is this bad or good key ?????
my problem is iprep make the hacked firmware not
how to create the hacked fw manualy ? i have orig.bin on my usb

Post edited by CoFree to hide key.

[CoFree]

your key looked good.it not a good idea to post your key for all to see.i edited your post by the way

if now that you have your orig firmware then you need to build your hacked firmware.
do it like this.
http://www.robinhoodsplayground.com/for ... =110&t=438
after you get your hacked firmware done the use the guide at the bottom of that post to flash it in your dvd drive.

[bob0190]

thanks for help CoFree
i have now my hacked fw for benq
in what folder place the hacked fw to iprep for writing to benq drive ?

[CoFree]

ok man do what this guide says
http://www.robinhoodsplayground.com/for ... =110&t=196
BUT
put in the hacked firmware and rename it.then do the restore and it will flash in the hacked firmware.

make sure to save a copy of your orig firmware of your computer.you can not lose it.

[bob0190]

i have flashed my benq drive
big thanks to CoFree you are the best

[Jman 31]

Wow, I guess the way cofree types was close enough to bob's english to make that all work out!lol Cograts bob0190 on getting it figured out. That went easier than I thought it would.

[bob0190]

what is better 8× or 12× speed fw on benq

[Jman 31]

Most of us use 12x because it is the stock drive speed. Supposedly the 8x will make the drive quieter, because its running slower but it also increases the load time for games. I stick with the 12x just in case MS can detect the difference.

[CoFree]

it's fine if you want to use the8x speed.
the stock drive is running with 12x speed.
when your drive is running unflashed 12x speed and it has a hard time reading the disc it slows down to 8x speed if it cant read it then it steps down again to 5x and so on.
so you see you can flash the slower speed and you should have no problem from M$ with the speed.
i HATE the load times so i flash the 12x so it will load as fast as possible .
i would trash the 360 if i had to wait for the 360 to load at 2X speed it would take for ever.