Benq Drive Bricked? HELP PLEASE!!!!

[CoFree]

man
i use a old ass dell and it will boot from a usb
but who knows
a floppy will work

[budokai666]

ok im currently erasing my drive. after it is done erasing, where do i go from there?

[CoFree]

do this
make a iprep boot flash with RHPG Iprep v009
in the backup folder make a folder named 1234567
then in that folder make a folder named 12345
in there put the firmware you want to flash in(a copy of your orig firmware ).It needs to renamed to ' bencfw.bin "
with out the " " of course
this would be a copy of your orig firmware that you rename.
then just flash it in like normal
boot on the flash and run the flash command
fben 1234567 12345

that will flash in a copy of your orig firmware.

[budokai666]

do this
make a iprep boot flash with RHPG Iprep v009
in the backup folder make a folder named 1234567
then in that folder make a folder named 12345
in there put the firmware you want to flash in(a copy of your orig firmware ).It needs to renamed to ' bencfw.bin "
with out the " " of course
this would be a copy of your orig firmware that you rename.
then just flash it in like normal
boot on the flash and run the flash command
fben 1234567 12345

that will flash in a copy of your orig firmware.

so where it says "load i xtreme firmware" leave it blank cuz ima flash my original firmware right?

[CoFree]

no you have to put a firmware in but
it dont matter which one you put
you are going to be using it anyway.
v1.51 should go in fine

then after the flash /floppy is made then do the steps

[budokai666]

no you have to put a firmware in but
it dont matter which one you put
you are going to be using it anyway.
v1.51 should go in fine

then after the flash /floppy is made then do the steps

ok i have a problem. when i boot the iprep, it keeps saying my drive is "no identify possible", so when i enter the number (which is 0xdcf0) it keeps saying "no atapi connected" or something along those lines

[budokai666]

O NVM I FOUND OUT WOOOT MY 360'S FLASHED TY ALOT GUYS