I have used jungle flasher to create a new spoof FW for my sammy using Ixtreme 1.61.
I now used Iprep 10.7 to create a folder in the back ups 1234567 and another folder 12345, and placed the SAMCFW within it.
When I am prompted to enter what kind of drive I have I noticed that Commando lee mentioned to someone else to enter
sam 1234567 12345 w
will that work to enter into just flashing it?
thanks guys.
redfield out...
iprep 10.7 spoofed sammy
Re: iprep 10.7 spoofed sammy
it should
i have not used the new iprep for doing that i still use a older one
i have not used the new iprep for doing that i still use a older one
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
No Questions by PM.
No Questions by PM.
-
chris.redfield
- Bandit
- Posts: 131
- Joined: Sat Oct 25, 2008 8:30 pm
Re: iprep 10.7 spoofed sammy
should I use an older Iprep or give what commado lee said a try?
-
chris.redfield
- Bandit
- Posts: 131
- Joined: Sat Oct 25, 2008 8:30 pm
Re: iprep 10.7 spoofed sammy
reporting back...
Using the script
sam 1234567 12345 w
is the correct method to enter into the write portion for the flash.
This method was used after taking the original liteon dummy file, opening it as "open target firmware" then placing the ixtreme 1.61 for the sammy in the target file. Applying spoof. then saving the sam_cfw file and renaming it to SAMCFW. Using Iprep 10.7 to make a bootable usb drive within the backups folder creating a folder titled 1234567, with in that folder placing another folder titled 12345, and finally placing the file SAMCFW within. perform a quick reboot or complete shutdown to make the removable drive boot first, this is depending on you mother board. once iprep starts when prompted to enter which drive you are working with enter, sam 1234567 12345 w and then follow the prompts.
This flash was done using the maximus extractor tool and the great help from the cofree videos and commado lees comment, as well a big thanks to Klutsh and c4eva.
redfield out...
Using the script
sam 1234567 12345 w
is the correct method to enter into the write portion for the flash.
This method was used after taking the original liteon dummy file, opening it as "open target firmware" then placing the ixtreme 1.61 for the sammy in the target file. Applying spoof. then saving the sam_cfw file and renaming it to SAMCFW. Using Iprep 10.7 to make a bootable usb drive within the backups folder creating a folder titled 1234567, with in that folder placing another folder titled 12345, and finally placing the file SAMCFW within. perform a quick reboot or complete shutdown to make the removable drive boot first, this is depending on you mother board. once iprep starts when prompted to enter which drive you are working with enter, sam 1234567 12345 w and then follow the prompts.This flash was done using the maximus extractor tool and the great help from the cofree videos and commado lees comment, as well a big thanks to Klutsh and c4eva.
redfield out...