XBC question

For questions with backing up your games!
Post Reply
bittersuit_98
Bandit
Bandit
Posts: 116
Joined: Sat Jan 10, 2009 10:01 pm

XBC question

Post by bittersuit_98 »

Trying to make a rip with XBC. Drive is BENQ with 1.6. hooked via ck3 to via sata cardt 6421. I tried in 2 different PC systems with the same result: booted to windows, the drive is not detected unless I do the half tray trick. Once the half tray is done, the benq VAD6038 is detected in the drop down menu of XBC, but when I put the disk the log says"no media present" and the tabs for "start" button (the tab where you click to read) shows as inactive. I also tried 3 or 4 different games to make sure the it was not bad media, still no go.
Again, i tried this on an XP and VIsta with the very same results....am i missing something here?
help appreciated. thanx
User avatar
HaGGardSmurf
Ally of Robinhood
Ally of Robinhood
Posts: 4088
Joined: Tue Feb 03, 2009 9:46 am
Location: Alberta, Canada

Re: XBC question

Post by HaGGardSmurf »

Does the drive work in a console? Also when you put a disk in does your drive make any noise, like its trying to read the game? If not, open your drive up and make sure your laser isn't stuck.
barelynotlegal
Squire
Squire
Posts: 26
Joined: Mon Nov 30, 2009 12:45 pm

Re: XBC question

Post by barelynotlegal »

hate to jump in, im using a ck3 blaster and cant get XBC to see my drive. i have it enabled to firmware mode and the tray is half open, but no reconition?(lite-on 74850c). any ideas? running 1.6 iX.
do i need to flash to 800 i read that 1.61 can doo it as well.
.
User avatar
HaGGardSmurf
Ally of Robinhood
Ally of Robinhood
Posts: 4088
Joined: Tue Feb 03, 2009 9:46 am
Location: Alberta, Canada

Re: XBC question

Post by HaGGardSmurf »

Does your comp assign it a letter? If not you will need to power your drive with the tray half open, and reboot your comp, it should give it a letter and show you a 'found new hardware' notification when you sign into your account.

If your drive has a letter, but you cannot see it in XBC, make sure you have the latest version of XBC, the previous versions dont support lite-on's
barelynotlegal
Squire
Squire
Posts: 26
Joined: Mon Nov 30, 2009 12:45 pm

Re: XBC question

Post by barelynotlegal »

well got it to reconize. installing driver successful, then showed the name of my drive. got all the way to seeing drive and media.here are the settings:
Image
here is the error:Image
Image
right before the errors it shuts off. i am using ck3 in firmware mode, i set it to vendor mode, then i hiot the eject button and it loads the media. so i hit the read button and it fails after a bit due to power loss.
the xbox is being powered by the brick and my VIA 6421 is enabled.
whats up with the power turning off.
i even tried to unlock drive, still turned off
even got to intro.bik or some kind of .bik(video)
.
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: XBC question

Post by CoFree »

doing a backup this way has always been a pain
the best thing is to just flash in the 0800 and dump your games
or bast
would be to pick up a samsung or benq dvd drive cheap on ebay
flash in the 0800 firmware and just leave it hook to your pc. ;)
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
barelynotlegal
Squire
Squire
Posts: 26
Joined: Mon Nov 30, 2009 12:45 pm

Re: XBC question

Post by barelynotlegal »

can i just flash the lite-on thats in the xbox via ck3 blaster then just reflash when done?
not really into the whole live thing, so not worried bout the HAMMER.
thanX
.
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: XBC question

Post by CoFree »

i think there is a lite-on 0800 firmware
not 100% on that
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
User avatar
cyantific
Ally of Robinhood
Ally of Robinhood
Posts: 494
Joined: Sun Jun 08, 2008 7:07 pm

Re: XBC question

Post by cyantific »

CoFree wrote:i think there is a lite-on 0800 firmware
not 100% on that
Yes there is.
RHPG, home away from home :)
barelynotlegal
Squire
Squire
Posts: 26
Joined: Mon Nov 30, 2009 12:45 pm

Re: XBC question

Post by barelynotlegal »

so just to confirm, i can flash the 800 FW to my current 360 lite-on that i use to play games? thenjust flash back?
is there a method i can use with wXripper then splitvid with xbc or mulleter
.
User avatar
HaGGardSmurf
Ally of Robinhood
Ally of Robinhood
Posts: 4088
Joined: Tue Feb 03, 2009 9:46 am
Location: Alberta, Canada

Re: XBC question

Post by HaGGardSmurf »

Flashing 0800, then flashing 1.6/1.61 after your done your backup is more work than just leaving 1.6/1.61 on there and doing the half open trick.

Personally I think kreon drives are the way to go. I went kreon, installed the drive in my computer and never looked back.
barelynotlegal
Squire
Squire
Posts: 26
Joined: Mon Nov 30, 2009 12:45 pm

Re: XBC question

Post by barelynotlegal »

yeah kreon would be nice. i am to lazy to go find and buy a kreon.
more work? not really when using the blaster, everything is built in.all i got to do is carry the brick around.
appreciate the time though and the thought!!!!
UPDATE!!!
got it to work,had everything right, i figured since in vendor mode there would be no video, i tried it a time with the av plugged in but since the green rings where working i figured it wasnt vendor mode. So in desperation(4hrs later, yeah im lame! but determined )i slapped that bad bitch in and noticed it said open tray(tray was half open)i tried.
WOOO HOOOO.100% complete and passed abgx newest release,
(hows this look?)straight from splitvid XBC to abgx..(@ x12 speed+ avg. 8-9)
thanX in advance


-------------------------------------------------------------------------------
\\//\\//\\//\\// _ |_ _ \ \/ /_ _ _ \\//\\//\\//\\//\\//\\//\\//\\//\\//\\
//\\//\\//\\//\\ (_||_)(_|/ /\ \_||_ | | //\\//\\//\\//\\//\\//\\//\\//\\//\\//
------------------------_|------_||_||_|--v1.0.2-------[http://abgx360.net]----

Checking for updates to abgx360.dat...
Server file abgx360.dat no newer than local file - not retrieving

C:\Users\dA_******_\Desktop\Xbox_Backup_Creator_v2.9.0.306\badlands(XBC).dvd is valid

Checking Game
ISO: "C:\Users\dA_******_\Desktop\Xbox_Backup_Creator_v2.9.0.306\badlands(XBC).iso"
Size: 7838695424 bytes (SplitVid 3rd or 4th wave)
Files in ISO: 532, Folders in ISO: 4
Total bytes used: 3523239865 (48.27%)
Game appears to have random padding

Checking default.xex
Original PE Filename: default.exe
Original PE Timestamp: 2009/08/27 18:48:02
Game Name: Borderlands
Developer: Gearbox Software
Publisher: 2K Games
Genre: Role-Playing Shooter (RPG + FPS)
No Avatar Awards
Achievements: 50 Achievements totaling 1000 Gamerscore
XEX CRC = EA06C6AA
XEX Media ID: B43AC2C687112BB61C7DA630-380D3355

Region Code: 0xFFFFFFFF
Region Free!

Checking SS
Timestamp of Authoring: 2009/08/31 00:00:00
Timestamp of Mastering: 2009/09/21 20:33:59
SS Version: 2 (trusted)
SS CRC = 9FAE12B6 (RawSS = 70A9FF0E)
SS Media ID: B43AC2C687112BB61C7DA630-380D3355 (matches game)
SS looks valid

Checking DMI
Timestamp of Authoring: 2009/08/31 00:00:00 (matches SS)
DMI CRC = 76FCB5F1
DMI Media ID: B43AC2C687112BB61C7DA630-380D3355 (matches game)
DMI looks valid

Checking PFI
PFI CRC = 2A4CCBD3
PFI matches known data (3rd wave - requires iXtreme v1.51 or later)

Video partition found
Video CRC = 0E58FB9D (V0 = CF942E7B, V1 = 4809B37A)
Video partition matches known data (3rd wave - requires iXtreme v1.51 or later)

Stealth check passed!

Starting Verification
Looking for 9FAE12B6EA06C6AA.ini in the online verified database
Server file 9FAE12B6EA06C6AA.ini no newer than local file - not retrieving

Using 9FAE12B6EA06C6AA.ini (367 bytes)
Video CRC matches
V0 CRC matches
V1 CRC matches
PFI CRC matches
DMI CRC matches
SS CRC matches
Xex CRC matches
AnyDVD style corruption was not detected
Game CRC = 3926DF88 (matches)

All CRCs match
Verification was successful!
.
Post Reply

Return to “Game Backups”