Hey guys. I have started to get this problem. I dont know how and why. But i have updated to Windows 7. I have flashed over 250 drivers. I get this message when i try to flash liteon drivers! Sammy works and benq.
Well i got this message 4 days ago. I orded then the new ck3 pro Revision D. Got it today and still the same.
plz help me.
Flashed Hitachi: 40 +, sammy 50+ BenQ around 80 + and LiteOn 100+
This is thnx to RHPG!
Wel, if your using the com port, you don't even need the USB drivers. Its possible that the com may have went bad. Have you tried it in another? Also, check your cabling and make sure that the com is set to the right port. These are just basic things to check and you probably already have, just some of the things that I've ran across before.
[the drive is no good but you can still get the key ok with ck3 pro Probe that will still work buy a new drive and all will be ok.
I had a Xbox 360 dvd drive that will not open I got the key ok with the Probe I did fixed the drive with sellotape and all work ok i can now open the drive and play games but i cannot flash the drive with dosflash or JungleFlasher i get ixtreme dvdkey extraction failed! even now that the drive is working ok so i know that it is the drive that is bad my drive is a liteon i had a spare liteon i gave it a test and i got the key no problem and flash it with LT you are getting a bad . FF80 or FFFF you cannot get FF72 that why you get ( ixtreme dvdkey extraction failed!)and i am useing Windows 7 and i tried it in xp as well same.
you cannot flash a bad drive or get the key without the Probe