ixtreme dvdkey extraction failed!

The place to ask your questions about the Xbox 360
Post Reply
User avatar
Gony
Merry Men
Merry Men
Posts: 176
Joined: Mon Jan 05, 2009 10:54 pm
Location: in the hood of SWEDEN
Contact:

ixtreme dvdkey extraction failed!

Post by Gony »

Hey guys. I have started to get this problem. I dont know how and why. But i have updated to Windows 7. I have flashed over 250 drivers. I get this message when i try to flash liteon drivers! Sammy works and benq.

Image
Well i got this message 4 days ago. I orded then the new ck3 pro Revision D. Got it today and still the same.


plz help me.
Flashed Hitachi: 40 +, sammy 50+ BenQ around 80 + and LiteOn 100+
This is thnx to RHPG!
User avatar
cainhunpi
Trusted Member
Trusted Member
Posts: 422
Joined: Sat Jan 31, 2009 6:31 pm

Re: ixtreme dvdkey extraction failed!

Post by cainhunpi »

is the tray half open? :)
Image
User avatar
Gony
Merry Men
Merry Men
Posts: 176
Joined: Mon Jan 05, 2009 10:54 pm
Location: in the hood of SWEDEN
Contact:

Re: ixtreme dvdkey extraction failed!

Post by Gony »

lol.. haha ofcourse it is.
Flashed Hitachi: 40 +, sammy 50+ BenQ around 80 + and LiteOn 100+
This is thnx to RHPG!
baconfrazzles
Peasant
Peasant
Posts: 10
Joined: Tue Oct 27, 2009 6:41 pm

Re: ixtreme dvdkey extraction failed!

Post by baconfrazzles »

have you tryed reinstalling your USB drivers, CK3 Pro Driver Installer v110
User avatar
Gony
Merry Men
Merry Men
Posts: 176
Joined: Mon Jan 05, 2009 10:54 pm
Location: in the hood of SWEDEN
Contact:

Re: ixtreme dvdkey extraction failed!

Post by Gony »

yes ofcourse i have done alll!! Can the com been destroyed or something.? please help me guys!
Flashed Hitachi: 40 +, sammy 50+ BenQ around 80 + and LiteOn 100+
This is thnx to RHPG!
sadalius
Robinhood
Robinhood
Posts: 4039
Joined: Wed Nov 07, 2007 6:06 pm

Re: ixtreme dvdkey extraction failed!

Post by sadalius »

Wel, if your using the com port, you don't even need the USB drivers. Its possible that the com may have went bad. Have you tried it in another? Also, check your cabling and make sure that the com is set to the right port. These are just basic things to check and you probably already have, just some of the things that I've ran across before.
Sadalius

No questions by PM please
HOTCAT77
Peasant
Peasant
Posts: 1
Joined: Sat Apr 18, 2009 4:52 am

Re: ixtreme dvdkey extraction failed!

Post by HOTCAT77 »

[the drive is no good but you can still get the key ok with ck3 pro Probe that will still work buy a new drive and all will be ok.
I had a Xbox 360 dvd drive that will not open I got the key ok with the Probe I did fixed the drive with sellotape and all work ok i can now open the drive and play games but i cannot flash the drive with dosflash or JungleFlasher i get ixtreme dvdkey extraction failed! even now that the drive is working ok so i know that it is the drive that is bad my drive is a liteon i had a spare liteon i gave it a test and i got the key no problem and flash it with LT you are getting a bad . FF80 or FFFF you cannot get FF72 that why you get ( ixtreme dvdkey extraction failed!)and i am useing Windows 7 and i tried it in xp as well same.
you cannot flash a bad drive or get the key without the Probe
barelynotlegal
Squire
Squire
Posts: 26
Joined: Mon Nov 30, 2009 12:45 pm

Re: ixtreme dvdkey extraction failed!

Post by barelynotlegal »

was it flashed with ? or is it stock? are you probing? cause after the initial time you will get that error. 32 bit right?
.
User avatar
Gony
Merry Men
Merry Men
Posts: 176
Joined: Mon Jan 05, 2009 10:54 pm
Location: in the hood of SWEDEN
Contact:

Re: ixtreme dvdkey extraction failed!

Post by Gony »

thnx. Its was a time ago i was in here. you are right, The drive was bad.. Got a new liteon and replaced it. I had already the key from it saved.


thnx
Flashed Hitachi: 40 +, sammy 50+ BenQ around 80 + and LiteOn 100+
This is thnx to RHPG!
Post Reply

Return to “Beginners”