I believe this might be the answer. Correct me if Im wrong.
http://www.acidmods.com/forum/index.php?topic=33994.0" onclick="window.open(this.href);return false;
2009. a0a2 853850c dg-16d2s-09c Maximus Xtractor vampire
Re: June 2009. a0a2 853850c dg-16d2s-09c.
Maximus Xtractor Vampire.Here might be another answer as well.
http://www.360xtractorpro.com/360xtractorpro/index.html" onclick="window.open(this.href);return false;
http://www.360xtractorpro.com/360xtractorpro/index.html" onclick="window.open(this.href);return false;
Re: June 2009. a0a2 853850c dg-16d2s-09c.
i had this problem but i was flashing back to stock i could not get the key out and couldn't fine the original at first but found it later so then i flashed it back to stock with the original key an F/W so then out of curiosity i tried to get the key again an it come out first try
IF CALSBURG MADE LIER'S THEY WOULD PROBABLE NEVER BE AS GOOD AS HICKS AND GILLETT
Re: 2009. a0a2 853850c dg-16d2s-09c Maximus Xtractor vampire
It is a pain!!!
Part 1 http://www.youtube.com/watch?v=HzBr1dT4vt8" onclick="window.open(this.href);return false;
Part 2 http://www.youtube.com/watch?v=xDz5-EDK" onclick="window.open(this.href);return false; ... re=related
Part 3 http://www.youtube.com/watch?v=dfxkjspT" onclick="window.open(this.href);return false; ... re=related
Part 1 http://www.youtube.com/watch?v=HzBr1dT4vt8" onclick="window.open(this.href);return false;
Part 2 http://www.youtube.com/watch?v=xDz5-EDK" onclick="window.open(this.href);return false; ... re=related
Part 3 http://www.youtube.com/watch?v=dfxkjspT" onclick="window.open(this.href);return false; ... re=related
- HaGGardSmurf
- Ally of Robinhood
- Posts: 4088
- Joined: Tue Feb 03, 2009 9:46 am
- Location: Alberta, Canada
Re: 2009. a0a2 853850c dg-16d2s-09c Maximus Xtractor vampire
Well this is definitely a v2 drive.
All you need to do is cut 2 traces, and either probe, or solder in the lt switch, then you can read the drive, then either repair the traces, or bridge them with the probe, and flash the drive like a 7 series.
All you need to do is cut 2 traces, and either probe, or solder in the lt switch, then you can read the drive, then either repair the traces, or bridge them with the probe, and flash the drive like a 7 series.