Need help with Moding my xbox 360
-
- Peasant
- Posts: 15
- Joined: Fri Jul 30, 2010 1:50 pm
Re: Need help with Moding my xbox 360
Ok, Im still trying to figure this all out. I have I prep 6.2 but I cannot find the 1.5 firmware anywhere. I looked on xbins.org, google, a few other xbox 360 forums, and youtube. I know it probably just me, I just can't find it. Is there any way you could send me a link or email me the file? I really did try, I sorry for being a pain in the ass, I just can't find it.
Re: Need help with Moding my xbox 360
you can find the v52 firmware at
xbins/xbox360/firmware/toshiba sam ts-h943/_old/xtreme52
then after you get that start using the video at 5:20 and it goes into what to do.
when you build use the use one of the sam firmware
man im sure there is a easier way now
i did that vid a long time ago but
ive not needed to even look for a fix to that problem in a long time.
you may want to think about getting sadalius to fix the drive for you man
sorry but i dont flash drive for people any more.
xbins/xbox360/firmware/toshiba sam ts-h943/_old/xtreme52
then after you get that start using the video at 5:20 and it goes into what to do.
when you build use the use one of the sam firmware
man im sure there is a easier way now
i did that vid a long time ago but
ive not needed to even look for a fix to that problem in a long time.
you may want to think about getting sadalius to fix the drive for you man
sorry but i dont flash drive for people any more.
-
- Peasant
- Posts: 15
- Joined: Fri Jul 30, 2010 1:50 pm
Re: Need help with Moding my xbox 360
Wow I keep hitting a roadblock every single time
. For some reason Iprep 6.2 on my comp will not use the Ixtrem 1.5 firmware so I found the 1.4 for benq. That firmware will load but when I tried to my usb bootable it gave me this error "System.IO.IOExecption: The volume does not contain a recognized file system." Any Ideas?

Re: Need help with Moding my xbox 360
the only reason you should get that is if you dont have the boot files on the flash
you are able to boot on to a flash from iprep right
if you use a new iprep
you know for 100% you pc is set up right to boot on a usb flash " right"
you are able to boot on to a flash from iprep right
if you use a new iprep
you know for 100% you pc is set up right to boot on a usb flash " right"
-
- Peasant
- Posts: 15
- Joined: Fri Jul 30, 2010 1:50 pm
Re: Need help with Moding my xbox 360
I know I can make a bootable flash drive off of I prep 12.2, I don't know why I'm not able to do it off of 6.2 . Do you think it would work if I made the bootable flash with 12.2 using the same steps as your video tut with 6.2? Again thanks for your help, I know this must not be fun trying to figure out all of the tech issues with nothing to really look at.
Re: Need help with Moding my xbox 360
it want hurt to try
you must5 be missing a step on the vid or something
you must5 be missing a step on the vid or something
-
- Peasant
- Posts: 15
- Joined: Fri Jul 30, 2010 1:50 pm
Re: Need help with Moding my xbox 360
I tried to use the new version of I prep with the steps in the video and it diden't work. You said that someone might be able to flash my drive for me? If so how much does it cost and what do I have to do?
Re: Need help with Moding my xbox 360
you need to pm sadalius
have a look over this thread
http://www.robinhoodsplayground.com/for ... 188&t=3450" onclick="window.open(this.href);return false;
have a look over this thread
http://www.robinhoodsplayground.com/for ... 188&t=3450" onclick="window.open(this.href);return false;
-
- Peasant
- Posts: 15
- Joined: Fri Jul 30, 2010 1:50 pm
Re: Need help with Moding my xbox 360
Thanks for trying to help me, sorry it was a waste of time, but I really appreciate you trying to help me fix it.
Re: Need help with Moding my xbox 360
its all good man
no prob
sometimes its just to hard to fix a problem one post at a time.
no prob
sometimes its just to hard to fix a problem one post at a time.