benq flash using blaster v2 HELP

[GRASSASS]

HI GUYS , i have read loads but cant find the answer to my boggle ...
I AM TRYING TO FLASH A BENQ USING BLASTER360 V2 USING DOSFLASH 16 VIA USB, I GET TO THE FIRST PART AND AM WAITING FOR THE (D1) TO FLASH BACK AND FORTH BUT ARENT GETTING IT. ???
I PREP SAYS THE PC IS DOS & IPREP COMPATIBLE ???
I HAVE TRIED OTHER SATA PORTS BUT TO NO AVAIL
PLEASE COULD SOME 1 GIVE ME A POINTER

COFREE'S VIDEO MAKES IT LOOK SOoo EASY WICH IS WHY I FOLLOWED TO THIS SITE, I BELEIVE HERE I WILL GET HELP AS I'V ASKED ELSEWERE WITH NO LUCK

I AM REDY WITH
VIA CHIPSET/BENQ 360/ BLASTER360 V2 / NOWT BUT TIME

[CoFree]

BLASTER360 V2 USING DOSFLASH 16 VIA USB

if you saw the old video on flashing with the dos flash.that is a old video.there is a better way.

you need a sata card in your computer like this one.it needs a via6421a or L chipset.
http://tekgems.com/Products/la-pci22-vt6421a.htm
a usb flash
thats it. the program you need can be found in the 360 programs thread on this site.
iprep101 v006.1

here look at this video it the new one.
http://www.robinhoodsplayground.com/for ... =110&t=277

let me know if you have any more questions.

[Jman 31]

HI GUYS , i have read loads but cant find the answer to my boggle ...
I AM TRYING TO FLASH A BENQ USING BLASTER360 V2 USING DOSFLASH 16 VIA USB, I GET TO THE FIRST PART AND AM WAITING FOR THE (D1) TO FLASH BACK AND FORTH BUT ARENT GETTING IT. ???
I PREP SAYS THE PC IS DOS & IPREP COMPATIBLE ???
I HAVE TRIED OTHER SATA PORTS BUT TO NO AVAIL
PLEASE COULD SOME 1 GIVE ME A POINTER

COFREE'S VIDEO MAKES IT LOOK SOoo EASY WICH IS WHY I FOLLOWED TO THIS SITE, I BELEIVE HERE I WILL GET HELP AS I'V ASKED ELSEWERE WITH NO LUCK

I AM REDY WITH
VIA CHIPSET/BENQ 360/ BLASTER360 V2 / NOWT BUT TIME

No offense man but turn your caps off. It looks like you are yelling at us! Oh and good luck with your flash. We'll be glad to help any way we can.

[GRASSASS]

CHEERS Ooops, but i'l shout "CHEERS" GUYS

cofree u the man
after trying & reading & trying again, the via cards is on order
many thanks for answering, and i'l let you know the outcome...

"caps-on"
!!! THIS PLACE ROCKS !!!
(does this make me a -merry man- ?)

[GRASSASS]

hi guys
got my card 2day set it all up and STILL coldnt get the "0x7f" to flash "d1"
? ? ?
i have the blaster v2 both switches are on "360" is this correct ?
i havent got a clue as what to do ,
would you guys know what im doing wrong ?

[Jman 31]

I would suggest doing your first flash without the blaster. That will ensure that you are not fighting that issue. Once you have flashed it then you can use the blaster in the future for flashing. Make sure you are using the port that is closest to the front of your computer on the via card.

[GRASSASS]

jman 31 u mean the slot on the inside of pc, thanks il try that
but surely i should b able to flash my drive using the blaster v2
are ther known issues with this method of flashing
thanks for replyin il now try the inside sata plug
back in a bit

[GRASSASS]

oh by the way when i set up iprep101v0006 following the new cofree vid
i cannot install the firmware i get a "no valid fw " but this -"\Firmware\BenQ-CFW.bin"
is already in load fw box ?

[Jman 31]

Yes you will definatly be using the inside port towards the front of your pc. There are some issues with initial use of the blaster, just as you were asking. Which way to have the switches set for example. It just simplifies the process by getting rid of one more piece of hardware. First thing I would do it move to the inside port though, that may be your only problem.

[Jman 31]

oh by the way when i set up iprep101v0006 following the new cofree vid
i cannot install the firmware i get a "no valid fw " but this -"\Firmware\BenQ-CFW.bin"
is already in load fw box ?

Go to the top of the iprep menu bar and click "tools" then click "check for updates". This will get the latest def file and should allow you to upload the fw.

[GRASSASS]

cheers jman31

im from yorkshire the home of robin...
how do i become more than a peasent ?? lol

[Jman 31]

cheers jman31

im from yorkshire the home of robin...
how do i become more than a peasent ?? lol

Post count is what gets the next classification. Most achieve more by posting to help others and that helps their post count. We won't tollerate posts just to boost your post count, but if you want to contribute by helping others with what you've learned we wouldn't mind a bit.

Jman

p.s. where you live doesn't get you any extra credit!

[lilrevuk]

posts my man....

And he ain't from Yorkshire, he's from Notts All cos 'his' airport's in Donny eh??

lilrevuk

[GRASSASS]

oh well we peasents will post on
jman im half way through using the inside sata port
just rebooting to say thanks and save fw

[sadalius]

Make sure that you check that dump for a good key before you flash it!!!