one hour after fix
one hour after fix
i repaired a ps3 last night for flashing red light , stripped it all down heated the board up with an heat gun and put a layer of as5 on and put it all back together worked perfect but after one hour it went again , is this common or did i do something wrong
Re: one hour after fix
any heat gun fix
is not a permanent fix
as far as how long
thats up to how well it all re-flowed
is not a permanent fix
as far as how long
thats up to how well it all re-flowed
Re: one hour after fix
so do you think i should do it again but for longer to get it hotter time and is it best to heat it on both sides
Re: one hour after fix
man
i cant give you advice on that
i dont like the heat gun stuff
i would find some where that would re-ball the chip
i cant give you advice on that
i dont like the heat gun stuff
i would find some where that would re-ball the chip
Re: one hour after fix
re ball mate never heard that before what does that mean and how is that done
Re: one hour after fix
they take the cpu/gpu off the mobo and clean it up
then put very small balls of solder on the chip and heat the board up to flow the solder
then its as good as new
then put very small balls of solder on the chip and heat the board up to flow the solder
then its as good as new
Re: one hour after fix
clever stuff then a bit out of my league mate cheers for the advise mate
Re: one hour after fix
haha
i dont do it myself
i dont do it myself