I take no credit for this tutorial. It was included with the new Jungleflasher.
**NOTE** Before doing this to your probe , concider purchasing the new cable which will allow you to yuse your probe with out modification. It is due in stock next week from what I have read. This is for those who dont wanna wait.
First of all you need to create your PMT Probe. This requires, basically 3 items
1. A Electrolytic Capacitor 1.0F 2.5v
2. Your drive power cable (maybe some spare wires too)
3. A probe (could be a pin – just something solid you can probe with)
On this one, I knocked of all the surface components with my soldering iron (we are only interested in the pin itself)
**Building your PMT Probe**
These pre-wired probe cables that come with CK Probe 1 & 2 are ideal as they already have the cables spliced into the main cable
If not you will need to splice 2 cables into your main loom
With the plug upwards (notice the pegs on top) the indicated cable is GND. The one directly below it is 3.3V.
If you are splicing into one of these cables attach a BLACK cable to GND
And a RED or BROWN cable to the cable below it.
As you can see this cable (CK one) has 3 cable already attached – please note this plug is upside down in comparison to previous picture.
This one is upwards
This one is upwards
If using the CK cable – chop the small plug of the end leaving you with 3 cables
Cut the red cable away – you don’t need it.
Now strip the ends of remaining 2 cables and tin them with your soldering iron, in preparation for next stage.
Now – you need to decide what you are using as a probe/pin
I have tried a few things – took the pin from a Vampire and pushed it into the vamps cable end. Cut away all the other cables – looks like this.
As I mentioned earlier – we are only interested that you can press it onto the PCB – It’s just a pin!
SO – for the sake of this tutorial I’m using the CK Probe 1.
Take your probe and solder the negative (-) leg of the capacitor to it
In the picture below, the 2 large solder point are both connected to the pin, so I choose to keep the cap further from the tip to aid visibility when using it.
Now take your cable you prepared and solder the
Brown cable to the Positive (+) leg of the capacitor
Black cable to the Probe (or Negative (-) leg if you only have 1 solder point on your probe)
Your PMT is complete.
NOTE: the power cable on these are short so don’t tape your cable to the body as it will restrict movement (unless you extend your cables first)
Alternatively you could do it this way –
Brown to Positive (+) leg of capacitor
Black and probe cable to the negative (-) leg
This is my own one that has a lot longer cable so I taped it to the body to keep it out the way and protect the solder joints from being pulled.
Homemade probe for dumping all Liteons
Please only 360 guide here
- yamackbuddy4
- Possible Ally of Robinhood
- Posts: 83
- Joined: Sun Apr 11, 2010 5:52 pm
Return to “Xbox360 guides go here”
Jump to
- News of Today
- ↳ Front Page News
- Welcome to Robinhoods Playground
- ↳ Rules
- ↳ Welcome
- ↳ Whats needed
- ↳ Say Hello
- Destiny
- ↳ RHPG in Destiny
- ↳ Tips and Tricks
- ↳ All Good Things
- ↳ Clan member needed
- The Camp site. Our home in the Woods
- ↳ The Forest
- ↳ Rants & Raves
- ↳ Car,Bike or boat
- ↳ MMA Mixed Martial Arts
- ↳ Water Sports
- ↳ Music , If you dig the sound waves this is the Thread for you.
- ↳ The Outhouse
- ↳ The Movie House & TV Room
- Game Reviews and Game News
- ↳ Gaming News
- ↳ Video Game Reviews from Revision3
- ↳ 360 Video game review
- ↳ Wii Video game review
- ↳ PS3 Video game review
- ↳ PSP Game Review
- ↳ DS game reviews
- ↳ 360 Game Reviews
- ↳ Xbox One Game Reviews
- Online Retailers & Product Review
- ↳ 360 Product Review
- ↳ Members Reviews
- ↳ Wii Products Reviews
- ↳ DS and DSi Products Reviews
- ↳ On-line retailer Review
- ↳ Members Product Review & Retail Site Review
- Tutorials and Downloads
- ↳ Tutorials
- ↳ 360 Tutorials
- ↳ Video Tutorials
- ↳ Drive Flashing Tutorials
- ↳ Other Tutorials
- ↳ Traditional Text/pic Style
- ↳ Drive Flashing Tutorials
- ↳ Other Tutorials
- ↳ PS3 Tutorials
- ↳ WII Tutorials
- ↳ Nintendo DS
- ↳ PSP Tutorials
- ↳ Ipod Iphone & Itouch
- ↳ Programs and Downloads
- ↳ 360 programs
- ↳ PS3 programs
- ↳ PSP custom Firmware & Programs
- ↳ WII Programs
- ↳ Programs you will need for most modding
- ↳ Ipod Touch Programs
- ↳ DS programs
- ↳ Tutorials submitted by members
- ↳ Xbox360 guides go here
- ↳ PS3 guides go here
- ↳ Wii guides go here
- ↳ PSP guides go here
- Consoles
- ↳ Xbox 360
- ↳ Beginners
- ↳ General information
- ↳ 360 DVD Drive Flashing
- ↳ IPreP
- ↳ Game Backups
- ↳ Cosmetic Case Mods
- ↳ What you're playing
- ↳ Junk
- ↳ J-Tag
- ↳ Wii
- ↳ Beginners
- ↳ General information
- ↳ Soft Mod Questions
- ↳ Homebrew Apps
- ↳ Hard mod or chip Questions
- ↳ Game Backups
- ↳ What you're playing.
- ↳ Junk
- ↳ Homebrew Apps
- ↳ Playstation 3
- ↳ General information
- ↳ What you're playing
- ↳ Junk
- ↳ Blackcat usb PSGroove
- ↳ PSP
- ↳ Beginners
- ↳ General information
- ↳ Hardware add-ons or changes
- ↳ What you're playing
- ↳ Junk
- ↳ HomeBrew APP for PSP
- ↳ Nintendo DS & DSi
- ↳ General information
- ↳ What you're playing
- ↳ junk
- Phone modding
- ↳ Cell phone News
- ↳ "AnDroid os" phones
- ↳ General Information & Questions
- ↳ Guides and Tutorials
- ↳ Other Cell phones
- ↳ iphone/ipod touch
- ↳ General Discussion
- ↳ iphone specific
- ↳ ipod touch specific
- ↳ Guides/Tutorials
- Computer Gaming & Hardware
- ↳ Computers
- ↳ General information
- ↳ Hardware
- ↳ Software
- ↳ Games
- Trusted Members