Tring to flash Hitachi 59

[wackey]

Hi all
Can someone please tell me step by step or a vdeo on how to program a Hitachi , i'm taking keys from a lite-on 83 and putting them in a Hitachi 59, or can t be done?

thnx guys

[CoFree]

as long as that liteon was from your console
you can dump the key from it and spoof it in a hit dvd drive firmware
but
if the console had a liteon and you spoof in a hit
that console will not play any more ap25 games
most of the new games will be having the check or one even better

[HaGGardSmurf]

You first need to dump your lite-on get the key from it.

Open that as source in jungle flasher, open the latest hitachi ixtreme as target, hit spoof then proceed to flashing.


Take a look at this for a flashing guide: http://www.robinhoodsplayground.com/for ... 195&t=4263

[wackey]

i did all that steps and i just get an error saying can't open ixtreme 1.1 bin...

thnx

[HaGGardSmurf]

What version of jungle flasher are you using? Should be the very latest, which i believe is like 1.8 something.

[wackey]

What version of jungle flasher are you using? Should be the very latest, which i believe is like 1.8 something.

i'm trying JungleFlasher.0.1.76.Beta
where is the 1.8 or?

[streamer]

The newest one is JungleFlasher v0.1.182 Beta (234) you can get it from teamjungles web site!!!

[CoFree]

you can find all the latest programs needed for you modding needs Here

[wackey]

thnx
i'll give it a try and report back

[wackey]

ok...did everything buy the video, it all loaded good ,,BUT....i put my lite-on keys in source. and the 1.1 hit in the target and spoof it,,,,keys from the lite on are in both rows, so i go to GDR3120 tab and go write..at the end, the keys for the hitachi are in there, not my lite-on,,,am i doing spmething wrong?

thnx

[HaGGardSmurf]

Try it in your xbox see if it plays games. Otherwise your going to need to use the spoof command. So you'll basically just flash the lite-on key over.

[wackey]

Try it in your xbox see if it plays games. Otherwise your going to need to use the spoof command. So you'll basically just flash the lite-on key over.

I did spoof it...thats where it changes after write....i'll try it in the xbox and let you know...

[HaGGardSmurf]

When you spoof key a box should pop up with a key loaded in it. Your going to want to make sure that's the key from your lite-on.

So when you load up the lite-on source hit save key and save the key.bin on your desktop, or just copy the key to your clipboard.

Then when you hit the flash key data and the box pops up paste your lite-on key into the box, or hit load key and open the key.bin file you saved earlier.

You might also need to flash spoof data but I'm not sure if it will make a difference either way.