Hi All
Not flashed my drive for a while, a quick question my drive is a Lite On 83850v1 which new firmware do I use to re-flash, can't find iextreme 1.91 ,and by the way I do have my key in a safe place.
Lite On 83850v1 query
Lite On 83850v1 query
Regards
Warship.
Warship.
Re: Lite On 83850v1 query
you can get the latest firmware release here
Re: Lite On 83850v1 query
Thanks for the quick reply cofree ,I have already downloaded the new firmware pack but don't know which one to use ? there does not seem to be a 1.91 for the 83850v1.
Regards
Warship.
Warship.
- louisM92
- Ally of Robinhood
- Posts: 814
- Joined: Fri Jan 16, 2009 8:46 pm
- Location: The Port, not far away from the forrest :)
Re: Lite On 83850v1 query
READ EVERYTHING BEFORE FOLLING INTRUCTIONS
first of all flash back to stock firmware and get the latest dash update from either xbox live or download it from xbox.com and apply it using a usb stick
then flash your drive with the firmware called LTPlus-025v1.91.bin, this firmware is the default firmware for all phat lite on drives now, dont bother trying to read the firmware from the drive after taking the update because you will need a probe 3 to do so
open your dummy firmware as source in jungleflasher which your should have dumped before, if you havent then make sure you dump it from the drive BEFORE taking the latest dash update
open the LTPlus-025v1.91.bin firmware as target firmware, click spoof source to target, save your new custom firmware somewhere
go into the MTKflash32 tab, click lite on erase and follow the instructions that pop up
once you have your drive in vendor mode (lite on erase procedure does this) click write, wait for it to flash the firmware, pop the drive back in your console and your done!
first of all flash back to stock firmware and get the latest dash update from either xbox live or download it from xbox.com and apply it using a usb stick
then flash your drive with the firmware called LTPlus-025v1.91.bin, this firmware is the default firmware for all phat lite on drives now, dont bother trying to read the firmware from the drive after taking the update because you will need a probe 3 to do so
open your dummy firmware as source in jungleflasher which your should have dumped before, if you havent then make sure you dump it from the drive BEFORE taking the latest dash update
open the LTPlus-025v1.91.bin firmware as target firmware, click spoof source to target, save your new custom firmware somewhere
go into the MTKflash32 tab, click lite on erase and follow the instructions that pop up
once you have your drive in vendor mode (lite on erase procedure does this) click write, wait for it to flash the firmware, pop the drive back in your console and your done!
Need your drive flashed? PM me to sort something out
OR email me at louismoylan@live.co.uk
Flashing in the UK
Also do drive replacements
Re: Lite On 83850v1 query
i would add
make sure you have a good dump and key before you start that
make sure you have a good dump and key before you start that
- louisM92
- Ally of Robinhood
- Posts: 814
- Joined: Fri Jan 16, 2009 8:46 pm
- Location: The Port, not far away from the forrest :)
Re: Lite On 83850v1 query
exactly why i said make sure you have your dummy dumped before doing anythingCoFree wrote:i would add
make sure you have a good dump and key before you start that
Need your drive flashed? PM me to sort something out
OR email me at louismoylan@live.co.uk
Flashing in the UK
Also do drive replacements