Hi everyone,
Buddy up the road just droped his liteon dvd drive so i can have a look at it, he tells me that they put benq FW on it,,how do i get the liteon FW on it?
It is saying :
Drive type Un-determined
Drive type Un-determined
Sending Vendor Intro to port 0xBC00
Status 0x51
Re-sending Vendor Intro:
Drive is NOT Lite-On, Aborting !
PhatKey files extraction aborted!
Is there away to get liteon FW back on it...thnx
Lite-on dvd drive ??
Re: Lite-on dvd drive ??
What does the case say the drive is? Does either of you have the key stored somewhere?
Today Money, Tomorrow the WORLD!!
Re: Lite-on dvd drive ??
case says lite-on...
get this when read...
0000: 05 80 00 32 1F 00 00 00 - 50 42 44 53 20 20 20 20 ...2....PBDS
0010: 56 41 44 36 30 33 38 2D - 36 34 39 33 30 43 20 20 VAD6038-64930C
0020: 20 20 20 20 20 20 20 20 - 00 00 00 00 00 00 00 00 ........
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
bold says benq
get this when read...
0000: 05 80 00 32 1F 00 00 00 - 50 42 44 53 20 20 20 20 ...2....PBDS
0010: 56 41 44 36 30 33 38 2D - 36 34 39 33 30 43 20 20 VAD6038-64930C
0020: 20 20 20 20 20 20 20 20 - 00 00 00 00 00 00 00 00 ........
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
bold says benq
Re: Lite-on dvd drive ??
There's a chance they put a lite-on case on a benq drive. Seeing as how Phillips made both systems its not that hard to do. You may have to look at the board inside to know for sure. If it's a lite-on you'll have to open the case anyways especially if this came from a box that was recently updated.
Today Money, Tomorrow the WORLD!!
Re: Lite-on dvd drive ??
its a liteon board in a liteon case ..not benq...it has benq FW on it
Re: Lite-on dvd drive ??
Try dumping it with DosFlash. JungleFlasher should still recognize that it's a lite-on. Weird. I would use DosFlash and see how that works. You may actually have to use some form of DOS program. But first try the GUI dosflash version.
Today Money, Tomorrow the WORLD!!
- HaGGardSmurf
- Ally of Robinhood
- Posts: 4088
- Joined: Tue Feb 03, 2009 9:46 am
- Location: Alberta, Canada
Re: Lite-on dvd drive ??
It sounds like they flashed a benq firmware, not a spoofed lite-on FW. Wasnt sure that was even possible...
Like technoe said try dosflash also have a look at this http://www.robinhoodsplayground.com/for ... 195&t=3226 following this guide, you will erase the drive and write lite-on FW, there are no safety checks in place like in jungle flasher, so you wont be told the drive is the wrong type etc, it will just go ahead and send the erase command and write the new FW to the drive.
Like technoe said try dosflash also have a look at this http://www.robinhoodsplayground.com/for ... 195&t=3226 following this guide, you will erase the drive and write lite-on FW, there are no safety checks in place like in jungle flasher, so you wont be told the drive is the wrong type etc, it will just go ahead and send the erase command and write the new FW to the drive.
Re: Lite-on dvd drive ??
JUST MAKE SURE YOU HAVE THE KEY. If you re-write the drive without the proper key and there isn't a back up anywhere then your buddy is screwed.
Today Money, Tomorrow the WORLD!!