please help me this is a crazy one
-
- Peasant
- Posts: 16
- Joined: Fri Jan 30, 2009 10:26 pm
please help me this is a crazy one
i have a special one here.lol i got this on ebay its a lite-0n 7series its been flashed before.but who ever did it bridged the r707, and i dont have any info from this drive, i cant get my probe to work, when i power everything on my probe is green and blue like i was in r707 whole, but cant dump ive tried half way open it just wont dump, i even tried to dump ixtreme hoping it had 1.5 on it but still nothing, all i get is bad data conection. im using maximus conectivity kit and spear, usb com port.i tried on 3 spots r707 and r52, pin 6 on chip, nothing, i put my tester on theses points and it shows good ohms on it. drive works good just want to update it,,, i have my other lite-on`s and i did them with no problems, thanks for your help..
Re: please help me this is a crazy one
if it has a newer firmware
you will have to do a mra track cutting hack to get a dump of the drive
or use a probe v3
you will have to do a mra track cutting hack to get a dump of the drive
or use a probe v3
-
- Peasant
- Posts: 16
- Joined: Fri Jan 30, 2009 10:26 pm
Re: please help me this is a crazy one
how can i determine if it has a newer firmware?
-
- Peasant
- Posts: 16
- Joined: Fri Jan 30, 2009 10:26 pm
Re: please help me this is a crazy one
i do have a probe 3 is there another way to use this compared to the spear,