Ritek dye burner max settings

[dalecheesy]

I'm sick of wasting Verbs so for anyone with a load of Ritek s04-66 discs i've been having good verified burns by changing the write speed settings to enable them to burn at 2.4x instead of only being able to select 4x in imageburn which was giving me verify errors at 50 percent. You can use MediaCodeSpeed to change the details of the ihas final.bin which corresponds to your drive then reflash it in. When you load the finalbin into mcse, double click on the Ritek s04-66 line and select RicohJPN D00-001 and click ok. It will flash a warning up saying that the Jpn will now not be supported, click ok then save the file. It will save it as iHAS-124B-AL0S-MKM001MKM003-final_speedpatched.bin or whatever one corresponds to your drive firmware. Now just flash it back over onto the drive and try a cheap disc with that dye on. I've been using Aritas with the Ritek dye but i believe memorex ones and a few others use the same. Seems long winded but its a doddle and won't affect the verb speeds etc. You can also try enabling force Hypertuning, online hypertuning and smartburn (which should be enabled by default) in the advanced settings in the lower right hand corner on the burning screen. However mine have been burning with the standard settings and with burnproof disabled and so far no bad burns and 100 percent verified.

Heres the firmware for the 124b's and the 524b's if you don't want to create it yourself:

Speedfix.rar

And MCSE if you want to make your own:

MediaCodeSpeed.zip

[CoFree]

good stuff
im going to copy and sticky in the
backup thread

[dalecheesy]

Yeah good plan. Wish i'd done this before buying more Verbs as i've got tubs of Aritas kicking about Just copied a few burns onto the hard drive and it worked at last Done my lil woopwoop dance when they verified hahahaha

[sas67]

thats wierd because all my verbs have verified 100% since getting ihas drive.mine are singapore mkm003's

[dalecheesy]

Ive had nothing but trouble with them. Tried opc on off enabling and disabling forced ht, online ht, clearing opc etc but as soon as I try a 4x burn it won't pass the verification stage. Ran them through kprobe and I get shocking pi and pif spikes. Tried India and Singapore mkm003s and they both give similar results. They verify at 2.4 but the kprobe results are well out of range. the best burn I got with them at 4x was by manually setting the layerbreak instead of optimum but the break spike shot right up but the pi and pif averages were fantastic and it curiously verifies but not with optimum set. I've gone through 2 packs trying to find the best results Ive changed the psu and checked the memory etc but I'm going to try them on another pc in case its the sata ports or something when I get another pack. Been a few people suffering the same on a few forums. So far my riteks are burning and verifying no bother and within kprope guidelines.

[EnVyMoNtOyA]

Dale dude! thank you so much for this.. fixed all my issues.. this is why i love this site so much and always visit regularly.. its like a band of brothers in here and we actually help each other without the big egos.

[dalecheesy]

More than welcome mate glad it worked for you.

[he-man]

You saved me a lot of agro! I've got about 15x s04-66 left that won't go to waist now.

Thanks for the info!

[decoy187]

I'm sick of wasting Verbs so for anyone with a load of Ritek s04-66 discs i've been having good verified burns by changing the write speed settings to enable them to burn at 2.4x instead of only being able to select 4x in imageburn which was giving me verify errors at 50 percent. You can use MediaCodeSpeed to change the details of the ihas final.bin which corresponds to your drive then reflash it in. When you load the finalbin into mcse, double click on the Ritek s04-66 line and select RicohJPN D00-001 and click ok. It will flash a warning up saying that the Jpn will now not be supported, click ok then save the file. It will save it as iHAS-124B-AL0S-MKM001MKM003-final_speedpatched.bin or whatever one corresponds to your drive firmware. Now just flash it back over onto the drive and try a cheap disc with that dye on. I've been using Aritas with the Ritek dye but i believe memorex ones and a few others use the same. Seems long winded but its a doddle and won't affect the verb speeds etc. You can also try enabling force Hypertuning, online hypertuning and smartburn (which should be enabled by default) in the advanced settings in the lower right hand corner on the burning screen. However mine have been burning with the standard settings and with burnproof disabled and so far no bad burns and 100 percent verified.

Heres the firmware for the 124b's and the 524b's if you don't want to create it yourself:

Speedfix.rar

And MCSE if you want to make your own:

MediaCodeSpeed.zip

Bro,
Thank u for the helpful information.
I tried Imation DVD+R DL (Disc ID: RITEK-S04-66). IMGBURN OK but the PIF/PI values are way too high. In conclusion, crappy media - not designed for 0800s! although strangely enuff the Dis ID is the same

I guess its not always just the dye being used but rather a combination of the brand + dye

Will try and source other non-Verbs...


IMGBURN log - no errors
I 03:28:23 ImgBurn Version 2.5.6.0 started!
I 03:28:23 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)
I 03:28:23 Total Physical Memory: 3,667,724 KB - Available: 2,633,528 KB
I 03:28:23 Initialising SPTI...
I 03:28:23 Searching for SCSI / ATAPI devices...
I 03:28:23 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (EClick here to enlarge (ATA)
I 03:28:23 Found 1 DVD±RW/RAM!
I 03:33:27 Operation Started!
I 03:33:27 Source File: C:\Users\Ali\Desktop\B2TB-BADCOMPANY3-XPG0800-D2\Battlefield.3.Disc.2-XPG.dvd
I 03:33:27 Source File Sectors: 4,267,015 (MODE1/2048)
I 03:33:27 Source File Size: 8,738,846,720 bytes
I 03:33:27 Source File Volume Identifier: DVD_ROM
I 03:33:27 Source File Volume Set Identifier: 64ce0000MS UDFBridge
I 03:33:27 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 03:33:27 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 03:33:27 Source File File System(s): ISO9660, UDF (1.50)
I 03:33:27 Destination Device: [2:0:0] ATAPI iHAS124 B AL0S (EClick here to enlarge (ATA)
I 03:33:27 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66)
I 03:33:27 Destination Media Supported Write Speeds: 2.4x
I 03:33:27 Destination Media Sectors: 4,267,040
I 03:33:27 Write Mode: DVD
I 03:33:27 Write Type: DAO
I 03:33:27 Write Speed: 2.4x
I 03:33:27 Link Size: Auto
I 03:33:27 Lock Volume: Yes
I 03:33:27 Test Mode: No
I 03:33:27 OPC: Yes
I 03:33:27 BURN-Proof: Enabled
I 03:33:27 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)
I 03:33:27 Book Type Setting: DVD-ROM
I 03:33:27 Advanced Settings - Force HT: No, Online HT: Yes, OverSpeed: No, SmartBurn: Yes
I 03:34:03 Optimal L0 Data Zone Capacity: 2,133,520
I 03:34:03 Optimal L0 Data Zone Method: Copied From Original Disc
I 03:34:03 Set L0 Data Zone Capacity Succeeded!
I 03:34:03 Filling Buffer... (80 MB)
I 03:34:06 Writing LeadIn...
I 03:34:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 03:34:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 03:34:08 Writing Layer 0... (LBA: 0 - 2133519)
I 03:56:06 Writing Layer 1... (LBA: 2133520 - 4267014)
I 04:18:15 Synchronising Cache...
I 04:18:20 Closing Track...
I 04:18:21 Finalising Disc...
I 04:19:14 Exporting Graph Data...
I 04:19:14 Graph Data File: C:\Users\Ali\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_FRIDAY-NOVEMBER-11-2011_3-33_AM_RITEK-S04-66_2.4x.ibg
I 04:19:14 Export Successfully Completed!
I 04:19:14 Operation Successfully Completed! - Duration: 00:45:47
I 04:19:14 Average Write Rate: 3,224 KB/s (2.3x) - Maximum Write Rate: 3,378 KB/s (2.4x)
I 04:19:14 Cycling Tray before Verify...
W 04:19:21 Waiting for device to become ready...
I 04:19:35 Device Ready!
I 04:19:36 Operation Started!
I 04:19:36 Source Device: [2:0:0] ATAPI iHAS124 B AL0S (EClick here to enlarge (ATA)
I 04:19:36 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-S04-66)
I 04:19:36 Source Media Supported Write Speeds: 2.4x
I 04:19:36 Image File: C:\Users\Ali\Desktop\B2TB-BADCOMPANY3-XPG0800-D2\Battlefield.3.Disc.2-XPG.dvd
I 04:19:36 Image File Sectors: 4,267,015 (MODE1/2048)
I 04:19:36 Image File Size: 8,738,846,720 bytes
I 04:19:36 Image File Volume Identifier: DVD_ROM
I 04:19:36 Image File Volume Set Identifier: 64ce0000MS UDFBridge
I 04:19:36 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 04:19:36 Image File Implementation Identifier: Microsoft CDIMAGE UDF
I 04:19:36 Image File File System(s): ISO9660, UDF (1.50)
I 04:19:36 Read Speed (Data/Audio): MAX / MAX
I 04:19:37 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 04:19:37 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 04:19:37 Verifying Layer 0... (LBA: 0 - 2133519)
I 04:28:50 Verifying Layer 1... (LBA: 2133520 - 4267014)
I 04:38:05 Exporting Graph Data...
I 04:38:05 Graph Data File: C:\Users\Ali\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_FRIDAY-NOVEMBER-11-2011_3-33_AM_RITEK-S04-66_2.4x.ibg
I 04:38:05 Export Successfully Completed!
I 04:38:05 Operation Successfully Completed! - Duration: 00:18:27
I 04:38:05 Average Verify Rate: 7,716 KB/s (5.6x) - Maximum Verify Rate: 11,256 KB/s (8.1x)

KProbe - different story!

[dalecheesy]

Wooh thats a massive spike. Sounds daft but you didn't knock the pc when it was burning by any chance as it could also be down to vibration or did you try a couple of discs with the same problem? If you have any left try it again with burnproof disabled and disable your online ht and your opc as i have mine set to off for 2.4x but noticed yours are on in the log. Bit of trial and error i know

[EnVyMoNtOyA]

hey dude.. the speed on KProbe needs to be set to 4x not max.. try it again with that setting and see what you get.