Hey you all,
I have a console here thats should be updated en flashed with the latest cfw
the dash is now on 14790 latest i believe available is 15574
the drive fw is liteon 7485 LT v1.1 should become v3.0
Now my Question is I get this error code on system update: 397F - 3CD6 - 1600 - 0703 - C000 - 0099
after reading and searching there should be no way to update the console any further than the dash it is on right now
as for the drive FW that I can still update
So now i want to know if with the latest fw the console will play all recent games or if it should need the dash update to
as for the dash update i flashed back to stock even pre and post stock nothing did work so it seems the error is logged into the system and not the drive, so i'm guessing to update the dash there will or isn't any solution
grtz
More important ?
- Deathuntou
- Trusted Member
- Posts: 188
- Joined: Sat Feb 21, 2009 1:55 pm
Re: More important ?
You could try updating it using a usb drive and see if that works
- machineGUNmike
- Squire
- Posts: 21
- Joined: Fri Jan 11, 2008 10:33 pm
Re: More important ?
I had the same problem a little while back. Starting from scratch and creating a stock bin from a LiteOn_Post_13141 bin finally fixed my problem. It seems that when I created the new bin from a stock post_ bin and then I spoofed it with my key info not all of the serial data transferred to the new bin. Made my Xbox act strange and refused to install any update after it was download. Even from a USB flash drive or burnt CD.
When I finally figured it out all of the info was indeed where it should be and my XBOX now works as it should. If you have your original stock dummy bin I would for sure spoof key info from that.
I see that you say that you tried a post bin but it wouldn't hurt to start over I would say and check that everything transfers into the new bin when spoofing the key info. Good luck.
When I finally figured it out all of the info was indeed where it should be and my XBOX now works as it should. If you have your original stock dummy bin I would for sure spoof key info from that.
I see that you say that you tried a post bin but it wouldn't hurt to start over I would say and check that everything transfers into the new bin when spoofing the key info. Good luck.