April 2008 Benq drive

The place for more technical questions about modding your Xbox 360!
cubik
Squire
Squire
Posts: 23
Joined: Thu Feb 07, 2008 10:36 am

April 2008 Benq drive

Post by cubik »

Hi there , I had to send my 360 back to m$ anyway i got it back with a nice new Benq drive in it (April 2008) so anyway hooked it up to my pc to flash it with an USB Iprep`d Mem card. I have flashed meny drives before, So here is my Problem
All go`s well untill i have to turn on my Xbox to start the dump ----> 7F turn on xbox then it swaps to 08 (Not D1) turn off Xbox wait 4 seconds turn on xbox then the 08 turns to D2 <-- Flashing, I cannot get it to start dumpin the original firmware, i must say i am a little stuck on this Any info would be awsome.
BTW i have not changed anything on my PC i the last 2 months or so and like i said i have flashed about 15 benq drives with no hassle whats so ever. :)
User avatar
Jman 31
Ally of Robinhood
Ally of Robinhood
Posts: 916
Joined: Wed Nov 07, 2007 2:51 pm
Location: Somewhere in the south

Re: April 2008 Benq drive

Post by Jman 31 »

Try a different flash drive. Have you ever used that flash drive before?
ROBINHOOD'S PLAYGROUND
cubik
Squire
Squire
Posts: 23
Joined: Thu Feb 07, 2008 10:36 am

Re: April 2008 Benq drive

Post by cubik »

I have allways used this flash drive but for some odd reason i just cannot get the proggy to flash this new drive and i cannot understand wht it flashes to D2 instead of D1, please help me :)
User avatar
Jman 31
Ally of Robinhood
Ally of Robinhood
Posts: 916
Joined: Wed Nov 07, 2007 2:51 pm
Location: Somewhere in the south

Re: April 2008 Benq drive

Post by Jman 31 »

Are you sure its a benq and not one of the new drives (I think they are lite-on)? Can you post up a pic of the tray? Cofree should have more to offer on this when he gets on.
ROBINHOOD'S PLAYGROUND
cubik
Squire
Squire
Posts: 23
Joined: Thu Feb 07, 2008 10:36 am

Re: April 2008 Benq drive

Post by cubik »

well fella its the same as the other benq drive ie no notches out of the tray it`s a U shape so i thought it was a Benq the drive, It says on the label Phillips & Lite-on digital solution`s

Model No DG-16D2S
HW Version : A0A1
FW Version : 74850C

If that helps !
User avatar
Sesshomaru
Board Warrior
Board Warrior
Posts: 475
Joined: Thu Mar 27, 2008 12:23 am
Location: Other Side of the Gate
Contact:

Re: April 2008 Benq drive

Post by Sesshomaru »

Then that is most likely the problem, it looks like MS is starting to distribute the newer BenQ's and Liteon's now. As of now there is no way to dump the firmware or mod the newer BenQ and Liteon drives. Are you in the US by any chance, there haven't been any of these drives spotted in the US that I'm aware of.
Image
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: April 2008 Benq drive

Post by CoFree »

man that is bad new for you
but yea you have one of the new dvd drive that are not flashable at this time.
here is a post sadalius did on the drive sometime back.
have a read.
http://www.robinhoodsplayground.com/for ... =63&t=1511" onclick="window.open(this.href);return false;
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
cubik
Squire
Squire
Posts: 23
Joined: Thu Feb 07, 2008 10:36 am

Re: April 2008 Benq drive

Post by cubik »

I am in the Uk i`ll slap up some pictures later today thanks for the responces people :)
User avatar
MsK
Ally of Robinhood
Ally of Robinhood
Posts: 652
Joined: Tue Jan 08, 2008 3:42 pm
Location: Nottingham / UK

Re: April 2008 Benq drive

Post by MsK »

cubik wrote:I am in the Uk i`ll slap up some pictures later today thanks for the responces people :)
it looks like these are only being used for repaired consoles at the moment... I havn't heard any reports of them surfacing in retail packets yet.
Image
User avatar
parminder
Ally of Robinhood
Ally of Robinhood
Posts: 695
Joined: Wed Nov 28, 2007 1:23 pm
Location: Birmingham/uk

Re: April 2008 Benq drive

Post by parminder »

when you sent the xbox for repair was the drive flashed with ixtreme or any firmware if it was it might be a way for them to stop you playing back ups or seomthing
flashed 16 benQ, 8 Sams25, 3 sam28, 2 hit 0059dj, 2 0047dh 3 0047dj, still stuck on 0078fk, failed 0047dj hardware

Image
cubik
Squire
Squire
Posts: 23
Joined: Thu Feb 07, 2008 10:36 am

Re: April 2008 Benq drive

Post by cubik »

yes it was flashed , tho tbh it was that log ago i cannot remember what i flashed it with >.<
sadalius
Robinhood
Robinhood
Posts: 4039
Joined: Wed Nov 07, 2007 6:06 pm

Re: April 2008 Benq drive

Post by sadalius »

As of now any xbox sent in for repair regardless of where the unit is from, when you get it back, it will more than likely have this new drive in it. You will probably start seeing them in retail units before much longer as well. They are un-moddable at the moment but of course they are being looked at by the right people.
Sadalius

No questions by PM please
User avatar
cyantific
Ally of Robinhood
Ally of Robinhood
Posts: 494
Joined: Sun Jun 08, 2008 7:07 pm

Re: April 2008 Benq drive

Post by cyantific »

sadalius wrote:As of now any xbox sent in for repair regardless of where the unit is from, when you get it back, it will more than likely have this new drive in it. You will probably start seeing them in retail units before much longer as well. They are un-moddable at the moment but of course they are being looked at by the right people.
Hi all. I just found this great site through CoFree's opening the 360 post on 360mods! I must say this site looks really nice and can't wait to delve deeper into it this summer. Anyways, I have modded gamecubes and Wiis before by soldering and have always ragged on 360 owners. I bought a PS3 a month ago and have been loving it. However, on June 7, I bought a 360 through dell and it will be here later this week. I'm not sure how much of a backstock DELL carries with these, but was wondering what the probability of getting a Lite-On drive is retail? It sounds like the probability is quite low which is great. I checked 360drives.com and it seems that most users reported a BenQ drive within the past few months. Is that simply from the users lack of general dedication to posting their drives or have Hitachi drives been cancelled? Thanks for reading.
RHPG, home away from home :)
User avatar
parminder
Ally of Robinhood
Ally of Robinhood
Posts: 695
Joined: Wed Nov 28, 2007 1:23 pm
Location: Birmingham/uk

Re: April 2008 Benq drive

Post by parminder »

you will have to wait and see as it all depends on probability. but if you are recieving a arcade xbox you might get either benq or the new one, if its a premium then hopefully a hit and sammy drives. hopefully you dont end up with hit 79 or the new benq. let us know what you get.
flashed 16 benQ, 8 Sams25, 3 sam28, 2 hit 0059dj, 2 0047dh 3 0047dj, still stuck on 0078fk, failed 0047dj hardware

Image
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: April 2008 Benq drive

Post by CoFree »

glad your here man.
there is no telling what you will get.
if you have soldered in a wii chip you should be fine if you get a v79 hit.
the benq would be the best.by far the easiest to flash.
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
Post Reply

Return to “360 DVD Drive Flashing”