Robin Hoods Playground

And if u want.. You can send me a Guide where i can see how to connect the 360 to my Computer..

thx again

man
its a sata cable
it has to plug on a onbo sat port or a pci sata card sata port.
the video shows you how it should be hook up to the ck3
the other end of the sata cable just plugs into the computer
this is the sata card i would get if your computer dont have sata ports
even if it does there is a good chance it wont work for doing your flashing and you would need this card anyway.
http://tekgems.com/Products/la-pci22-vt6421a.htm" onclick="window.open(this.href);return false;

Omg tought this were free!

The software to do it is, the only thing that will cost you will be if you don't have the required hardware in your pc. As cofree said that card is the best option but if you have compatiable sata ports on your motherboard you should be able to flash it.

How do i know if i have these SATA ports on my motherboard?

thx

You could right click on the "my computer" icon on your desktop, Click properties at the pop up tab, then click on hardware, then device manager then look to see if there are any "scsi and Raid" controllers listed.

They look like this but not necessarily placed there and that colour:


Not all sata ports are compatiable with flashing though which is why it might be better to purchase the card.

I found 2 sata ports on my motherboard! These 2 are not in use, its free
So.. WHat do i do next??

vista223 wrote:I found 2 sata ports on my motherboard! These 2 are not in use, its free
So.. WHat do i do next??

unfortunately that still does't mean it's going to work. i recommend as cofree said that you cop that via sata card. . . i also think you should look at cofree's tutorials, it explains everything, you just have to get the required hardware. i started of exactly where you're at right now and i basically watched the tuts until i was well versed and then i got the card and moved forward. first flash was a success, that card is like 12 bills, worth the investment. . . and if you're working with the new lite-on drive you'll need the CK3 Lite as well, you should be good money after having those two things.

I have benQ not lite-on !

How do i get my USB-stick bootable ? (if i get my USB-stick bootable can i just connect it to my XboX 360 and boot ? ty)

have a look at this
http://www.robinhoodsplayground.com/for ... 110&t=3557" onclick="window.open(this.href);return false;

It says: You need to have following volume to continue extraction:D:\Users\Administrator\AppData\Local\Temp\Ipre v008.8 BenQ 360 dvd drive flash.part2.rar
Insert a disk with this volume and press OK to try again and press Cancel to breake extraction!

well man you can watch the video you dont have to down load it but
if you do its a 2 part rar file.
you have to get both files and unrar it.

Yee, but today i gonna buy a memory - stick!
So i can make it bootable and put Ipreop inside! Right?

If your computer will support booting from a USB flash drive you will be able to.