Robin Hoods Playground

iprep will let you do this by flash drive (USB), a DOS partition on your hard drive, or a floppy disk. The last 2 methods are a little tricky to get setup, but will work. It won't work by CD though. The 360 modification disk will work by CD though.

sadalius wrote:iprep will let you do this by flash drive (USB), a DOS partition on your hard drive, or a floppy disk. The last 2 methods are a little tricky to get setup, but will work. It won't work by CD though. The 360 modification disk will work by CD though.

what he said

thnks for that help...but i wanted to ask one more thing....

it shows in red and says no vaild key found...wht should i do abt this..

STOP and don't go any further as that indicates a bad dump and if you erase the drive you'd be left with a dvd player. Which drive are you trying to flash?

dalecheesy wrote:STOP and don't go any further as that indicates a bad dump and if you erase the drive you'd be left with a dvd player. Which drive are you trying to flash?

am tryin to flash benq drive but it keeps sayin no valid key found wht should i do..to get the valid key to be found

first man you hijacked a thread
its not a big deal but it is rude.

what you need to do is post a clear question in the beginner 360 thread and we will have a look
you will need to go into detail about what you are doing.

also have a read over this
its a older guide but it goes into the benq well.
http://www.robinhoodsplayground.com/for ... =197&t=662" onclick="window.open(this.href);return false;

correct me if i'm wrong....

Iprep can now flash 1.5 to 1.5.1 to the Lite-on's

From what I understand, it can flash it, but there is some sort of problem with the dumping 1.5 and making the 1.51 firmware or something. I think CoFree knows a little more about this than I do.

Bishop05 wrote:correct me if i'm wrong....

Iprep can now flash 1.5 to 1.5.1 to the Lite-on's

yes
it can
but
you can not have the r707 point soldered.
you have to use a probe of some kind.

you will need to update the def file in iprep also.

so i can dump the FW using JF and flash with iPrep?
is this the correct procedure to use, as I stated before in a different thread I really don't like using JF

well
man i looked back over the thread
what are you wanting to do

reflash a lite-on
is that right

if so just do the whole thing with iprep
but
you can not have the 707 soldered
you will need to use a probe

thats what i wanted to do reflash 1.5 to 1.5.1, i thought this was not possible to this with iPrep.
i asked this in a different thread and i was told it was not possible to do at this point. I guess I was mistaken....


if so I'm a happy camper!

Yeah Cofree, klutsh and sadalius have worked out that it was the soldered 707 points which were causing the liteon problem with iprep. Use a probe instead and you'll be sorted.

thanks hopefully this will work