Robin Hoods Playground

mrsmackdaddy wrote:primary port is FEDO

you can bet that is the 1st or primary port
is this a onbo port or is it a sata card.

iprep has to be on the 1st port

the format will not lite up till you hace a drive that can be formated plugged in the pc.
put a usb flash in and you should be able to see it in the drop down.

ok couple of dumb questions? got it formatted on my usb flash but how do i reboot from usb? i dont have that option.
and second, i feel really stupid, but where do i find my serial key to type in if i did get it to boot from usb? thx again for all the help

mrsmackdaddy wrote:how do i reboot from usb?

you will have to go into your pc bios and set it to boot from other devices and/or usb

mrsmackdaddy wrote:where do i find my serial key to type in

it is the 12 numbers on the back of your 360

thx for trying to help cofree, i cant get it to boot from usb cant find nothing in the bios for usb. just removable devices and thats #1 on the boot. think im just gonna give up and take a loss on the money spent. thx again everyone

prep your usb stick then boot from an msdos start up floppy (set the floppy as your first boot device) and also insert your usb. When it boots to msdos and you get to the A:\ prompt type B:\ (if its correct it will change the A:\ to B:\ but it might be a bit of trial and error then type dir and press enter (just to check that your usb is selected, you can skip this bit if you want). It should show you the directory of the usb stick then you can use the usual iprep commands.

i dont have a floppy drive....lol

Theres that outta the window then..lol. Are you getting a flashing cursor when you try and boot from the usb? Or is it going straight into windows? If all else fails you might have to try and get access to another pc.

straight to windows! wish i could get jf to work.....lol

When you're trying jungleflasher have you removed the viamraid.sys driver from the system 32 folder??

cant remember if i did! lol...could u tell me how to do it again? thx so much

Yeah follow sadalius' guide. viewtopic.php?f=63&t=4351&start=0" onclick="window.open(this.href);return false;

For a quick check open your device manager and see if the Via card has a yellow exclamation mark.

nope it doesnt so i will try that quick and will let you know! thx

i have 2 viamraid files. should i rename them both?

Curious you should only have one but yeah change the extensions from .sys to .bak and you're good to go.

when i rename the viamraid.sys and get the yellow !mark, it doesnt show up in my drives. when i put it back to normal my drive shows up. so when my viamraid drivers are back to normal, on com 1 find my drive, hit get key. a couple of times it said bad serial data then other times it just freezes. i tried it on com4 which is my usb i got 2 keys out of 6 then it froze! any other suggestions? thx