Page 2 of 2
Re: ms28 spoof into liteon, 1.51 FW lets go!
Posted: Wed Apr 15, 2009 12:28 pm
by chris.redfield
awesome cofree, thank you..
should i enable my via drivers when using iprep. i believe i should and will do so but you let me know.
redfield out.
Re: ms28 spoof into liteon, 1.51 FW lets go!
Posted: Wed Apr 15, 2009 12:38 pm
by chris.redfield
lol ok so i enable my via controller again renaming the .bak to .sys and just to check if i made a difference i used maximus xtractor software, worked!
then i opened up jungle flasher and bam it worked!
so now i have my lite on key and the target to the new samcfw 1.51 and spoofed it.
now i go to mkt flash 32 and can see my drive, now my driver because it is already spoofed shows it as a liteon drive. i read that i have to take the sammy into service mode to enable to flash is this correct, cofree the pdf wasnt very clear but i will read it again..
thanks guys and sorry for the headache if anything this will help out some other unfortunate soul that i lost in the real of firmwares.
thanks guys
redfield out.
Re: ms28 spoof into liteon, 1.51 FW lets go!
Posted: Wed Apr 15, 2009 9:00 pm
by chris.redfield
Ok alls well ends well.
using your method cofree i used i prep on a usb driver and erased and flashed.
100%
you guys are the best.
redfield out.
Re: ms28 spoof into liteon, 1.51 FW lets go!
Posted: Thu Apr 16, 2009 10:56 am
by CoFree
good man
glad you got it running.