Robin Hoods Playground

ok, if you already have jungleflasher 1.60, you just need to download the ixtreme firmware for your drive. Go into the xbox 360 section, then into the hacked firmware section, then into the section for the lite-on drives and download the repack rar file. Once you download it. Open it with winrar and put the bin file in the firmware folder.

If you don't already have jungleflasher 1.60 download that from jungleflasher.net. Extract it out and put the ix16-liteon-repack.bin file in the firmware folder of jungleflasher 1.60, then rename it from ix16-liteon-repack.bin to ix16-liteon.bin

then run jungleflasher.

can i still do hitachi drives with JF 1.6?

Yes, just make sure you get the Ixtreme 1.51 firmware for now until the new firmware comes out. I guess it takes a little longer to produce the new firmware for those little buggers.

ok i went ahead and put 1.55 and 1.6 JF on my computer
so i can get all the drives done.

You just have to make sure that you have the ixtreme firmware files for lite-on, benq, samsung and hitachi in the firmware folder of jungleflasher. If everything is setup proper for jungleflasher on your computer you should be good to go.