Robin Hoods Playground

are you sure what dvd drive is in your console

i followed everything in your video...i didnt have or i thought i didnt have a com port in the back of the computer but it was on the onboard...so i plug a cable up..i also have pci express com rs232 card coming too.

it says liteon....but the xbox was made in 2006 but the drive was made in 2008

grandview wrote:.i didnt have or i thought i didnt have a com port in the back of the computer but it was on the onboard

so it does or it does not have one.

i have a lite-on drive that was made in sept. 2008

i am getting agervated.
gonna walk away for a bit.
ill check back in about 20 min.

im gonna go barrow a serial mouse to ensure my com1 is working.

i do too..i have a liteon to that was made in 2008...but my xboxs was made 2006..why would a xbox from 2006 have a 2008 drive in it...i told you before i had to turn it back to ms...maybe they hot swaped it i dont...cause it say mimics benq with i get error...plus i just went to radio shack and bought a rs-232c cable..and still same thing

well man
i can not get the answers from you i need to help
or im just not understanding you

yes my board has a com1 connector

now give me your pc setup and the way you are trying to flash your drive
(what app are you trying to use)

first i launch iprep 008.9 i load the liteon ix1.5 firmware...my primary port:e400 sata controller: via vt6421...
com port: com 1..format it include batch files format at fat32
i start up iprep in dos i have the sata hooked up the com cable hooked up the ck3 probe ready...i follow the steps turn off power..half tray. power back on..press y i got the probe in the 707 point and it says
CEREMIA'S DVDKEY METHOD FAILED
FILE NO FOUND-KEY.BIN DUMMY.BIN.DUMMY.BAD
CANIT OPEN KEY.BIN
USAGE.DUMMYGEN
CREATES DUMMY.BIN FROM DVDKEY OUTPUT
OUTPUT ROUGHLY MIM ISC A BENq IMAGE FOR USE FILEs with firmtool1.3
ERROE:FILE BACKUPS/1234567/12345/DUMMY/FIRMTOOL1.3.BIN
DOES NOT EXIST

how do you upload pics?

well
the only thing i can see is
its not getting the files through the com cable
as long as you are doing things like the video

ok i figured out my problem.
i purchased this db9 serial adapter
http://www.cablestogo.com/product.asp?c ... &sku=09480" onclick="window.open(this.href);return false;

i was in a hurry and bought the wrong one.
i need this one
http://www.cablestogo.com/product.asp?c ... &sku=27550" onclick="window.open(this.href);return false;

difference is one of them is a crossover and the other is a straight threw.

i feel better knowing it was my error.

im gonna over nite this adapter. ill let you know it it goes.

it can not be a null or cross over cable

nonono i am talking about the serial port adapter that connects to the motherboard. not the serial cable
because i have an intel board i needed the adapter for the intel MoBO i got the one that works with other mobo's