Page 2 of 2
Re: help flashing lite-on drive
Posted: Fri Aug 28, 2009 10:13 pm
by malis504
i try jungle flasher but once i turn on the connectivy kit it freeze up.
Re: help flashing lite-on drive
Posted: Fri Aug 28, 2009 11:27 pm
by HaGGardSmurf
Disable your via drivers.
Right click my computer, go to device manager, look under raid controllers, and find your via card, right click it and click disable.
You should have no freezing issues now...
Re: help flashing lite-on drive
Posted: Mon Aug 31, 2009 8:01 pm
by malis504
OK HERES THE PROBLEM I USE JUNGLE FLASHER 0.0.26 AND IT TELL'S ME BAD KEY "0000000000000". THEN I USED JUNGLE FLASHER 0.1.60 AND IT TELL'S ME BAD SERIAL PORT. CAN SOMEONE HELP ME GET PASS THIS?
Re: help flashing lite-on drive
Posted: Mon Aug 31, 2009 8:15 pm
by rkd2398
Which are you using the RS232 or USB? Just a heads up, all caps is SCREAMING. We will help you just take a deep breath and relax.
Edit: I looked back over your post. Try the usb cable again, download the drivers here:
viewtopic.php?f=112&t=48" onclick="window.open(this.href);return false;
Once you have those installed try JF again. Like I said take a breath and take your time. You don't want to buy a new 360.
Re: help flashing lite-on drive
Posted: Mon Aug 31, 2009 8:52 pm
by malis504
ok sorry bout the all caps, but im using the rs232 cable
Re: help flashing lite-on drive
Posted: Mon Aug 31, 2009 8:58 pm
by rkd2398
malis504 wrote:ok sorry bout the all caps, but im using the rs232 cable
Did you read the rest of the post? Get those drivers and try JF one more time.
Re: help flashing lite-on drive
Posted: Sat Sep 05, 2009 6:10 pm
by malis504
ok i have the "key" "inquiry" and "identify". i spoof that into my ixterme 1.6 repack and it gave me the "lite_cfw". can i go from here and use iprep to flash or do i still have to dump the files.